Friday, February 23, 2024
HomeReaders ChoiceWater Inlet Valve Dishwasher Bosch

Water Inlet Valve Dishwasher Bosch

Is It Worth It To Repair A Dishwasher

Bosch Dishwasher Won’t Fill? Replace Water Inlet Valve #622058

When your dishwasher is less than 8 years old and the repair cost is less than half the cost of buying a new dishwasher, its typically more economical to repair the dishwasher. Many dishwasher repairs cost less than $250, so youll often want to repair the dishwasher rather than replace it.

Read about the most common causes of dishwasher issues and how to correct them.

Test The Water Inlet Valve

Attach your test cord or battery pack to the valve. If water flows freely through it, the inlet valve isnt causing your dishwasher problems.

But if the water flows slowly or not at all, the inlet valve may need cleaning. And if its free of debris yet still restricting water flow, you have a broken valve that must be replaced.

Whirlpool Tall Tub Built

Best Affordable Energy-Efficient Dishwasher

For some, energy efficiency is of utmost importance. Check out the Whirlpool Tall Tub dishwasher. This Whirlpool Dishwasher It has an Energy STAR certificate, is CEE Tier 1 qualified and runs at only $31 per year, according to standard energy prices and usage.

So if you want to cut the cost of running, this is the dishwasher to consider. Of course, it has great cleaning features, too. Firstly, its a spacious option. There are 14 place settings, an adjustable silverware basket and its a tall tub washer.

As for the cycles, there are four main options: normal, heavy, one hour wash and Soak & Clean. So whether you want the dishwasher to take its time on a heavy wash, or go at ultra-speed with the one hour wash, the world is at your disposal.

You can also choose from these options: heated dry, high temperature, sanitization cycle and sensor wash.


  • It doesnt dry the dishes well.
  • Not the quietest 55 decibels.

Product Specs

Energy Star and CEE certified

Read Also: How Much Cascade Liquid To Use In Dishwasher

Replacing Water Inlet In The Dishwasher Bosch

1 Expansions opening-nut 2 Cover, water inlet 3 Water inlet connection

1 Markierung

1 Water supply hose with clamp 2 Impeller wheel counter with cover 3 Catch mechanism

  • Bend out the guard cover of the impeller wheel counter and remove plug connection.
  • Loosen hose clamp on the water supply and remove supply hose.
  • Carefully pull water inlet forwards. In doing so, detach from the holder on the rear of the appliance and remove.
  • After prolonged operation the water inlet may become stuck to the bitumen insulation and be difficult to remove.

    If Your Dishwasher Wont Start

    Fit To Support Bosch Dishwasher Water Inlet Valve # 00622058
  • Open the door and close it firmly to ensure its closed properly.
  • Make sure that you are closing the door within 3 seconds of pressing start if it has a top-button control.
  • Confirm that its recieving power. If lights on the display dont turn on when you press them, reset the breaker and try again.
  • Check that the Control Lock or Delay Start options arent selected on the displayyour dishwasher wont start as expected in these modes.
  • Make sure the water supply valve to your dishwasher is turned on all the way.
  • Clear any debris that may be caught under the float assembly located on the bottom of the dishwasher tub and be sure that it can move up and down freely.
  • Recommended Reading: Are Aluminum Cups Dishwasher Safe

    Black Bosch Dishwasher In Stock

    Part Number 5308000010

    The evaporator fan blade is used in conjunction with the evaporator motor. If you have noticed that your refrigerator is warm or chirping or squalling noises coming from the freezer section this part may need to be replaced. Please remember to unplug or disconnect the electrical power source to the appliance before replacing this part.

    Recommended Reading: Danby 18 Portable Dishwasher Ddw1805ewp

    Samsung Linear Wash Stainless Steel

    Best Affordable Quiet Dishwasher

    Whisper-quiet operation is a common factor to forgo when you choose an inexpensive dishwasher. But for many families, especially in homes where the bedrooms are near the kitchen, its important to have a quiet dishwasher.

    The Samsung Linear Wash operates at 42 decibels, so its very quiet. You definitely wont be able to notice it from another room.

    This dishwasher has a first-of-its-kind WaterWall feature. The sliding spray bar moves back and forth to give deep and even cleaning results during the cycle.

    We also love that this dishwasher has an AutoRelease door which opens automatically to aid the drying cycle.

    And dont forget about the Zone Booster function which targets areas of the dishwasher with custom settings. So if you have delicate glasses or heavily soiled pots, the Zone Booster focuses more on these areas to ensure a deep clean.


    Read Also: Bosch Silenceplus 44 Dba Dishwasher

    Samsung Top Control Built

    Best Affordable Top Control Dishwasher

    Top control dishwashers are great for a sleeker look, hiding buttons from curious fingers, and they have nicer handle options. If youre in the market for a top control built-in dishwasher, check out this dishwasher from Samsung.

    The digital controls are easy to use and select. As for the cycle options the four main ones are: auto, normal, heavy and express 60. You can customize these by adding a high-temperature wash, a sanitization cycle, delay start or a heated dry cycle.

    When it comes to loading the dishwasher, the racks are adjustable. So you can lower, raise or remove them to fit in your specific dishes. There is space for 14 place settings, making cleanup after dinner parties super easy.


    • The drying cycle isnt super effective.
    • Issue with the electrics. Lights may blink continuously.

    Product Specs

    If The Door Wont Stay Closed

    Bosch dishwasher inlet water valve replacement HOW TO DIY.
  • Check for pots, pot handles, or other objects that may be extending out of the rack area.
  • Clear away any foreign objects or food debris that has built up on the door gasket .
  • If your dishwasher is new, you may need to push more firmly than usual on the door until the new door gasket softens up.
  • Make sure the lower rack is not in backwards by confirming that any plastic spacers on the rack are facing the door.
  • Make sure the dishwasher is level side-to-side and front-to-back.
  • Also Check: Install Dishwasher With Granite Countertops

    Replacement 00607335 Dishwasher Water Inlet Valve For Bosch / Thermador

    Replacement 00607335 Dishwasher Water Inlet Valve for Bosch / Thermador
    Orders placed by 4pm ET ship today!*

    Replacement water inlet valve used for some Bosch, Kenmore, and Thermador dishwasher models.

    Directly Replaces: 00607335, 607335, WV7335, 1386463, AH3477055, AP4070550, EA3477055, EAP3477055, PD00000067, PS8726680, PS3477055.


    • Lets water into the dishwasher.
    • Includes Water Valve and Bracket Assembly.


    Dont Miss: Dishwasher Repair Charles Town Wv

    Make A Testing Cord For Ac

    Make a test cord out of a power cord, two crimp-on insulated terminals, and a crimping tool for an AC valve. The power cord should have three wires: ground, hot, and neutral.

    Strip the insulation off the hot and neutral wires and cut the ground wire to keep it out of the way. Crimp the insulated terminals onto the stripped ends of the hot and neutral wires .

    Don’t Miss: How Much Water Dishwasher Use

    If Your Dishwasher Is Leaking

  • Open the door and close it firmly to ensure its closed properly.
  • Make sure the dishwasher is level side-to-side and front-to-back.
  • Adjust the rinse agent dispenser to a lower number setting to ensure that there is not too much rinse agent being dispensed.
  • Run the dishwasher without detergent to ensure the problem isnt caused by using too much detergent.
  • Guilty As Charged: The Water Inlet Valve

    Bosch 00628334 628334 Dishwasher Inlet Valve

    Repair professionals understand that just a few components are responsible for most appliance problems.

    With dishwashers, the water inlet valve is always a prime suspect. When your dishwasher goes rogue, expect to find the inlet valve in the subsequent police lineup.

    Signs pointing to a faulty inlet valve include:

    • Leaks that fill the dishwasher when its off.
    • Inadequate water for a cycle. The dishwasher fills too slowly or not all.
    • A bad inlet valve can lead to leaks from the dishwasher onto the kitchen floor. This is potentially hazardous.
    • Most inlet valve malfunctions stem from a defective seal or solenoid failure.

    Also Check: Bosch Dishwasher Drain Hose Extension

    How To Replace Your Dishwashers Water Inlet Valve

    This article was co-authored by Gevorg Grigorian. Gevorg Grigorian is an Appliance Repair Specialist and the Owner of G and R Appliance Repair in Los Angeles, California. With over 12 years of experience, Gevorg specializes in residential and commercial appliance repairs as well as heating, ventilation, and air conditioning services. Gevorg holds a BS in Business Administration and Management from California State University-Northridge. This article has been viewed 45,588 times.

    The water inlet valve feeds the water from your homes water line into the dishwasher. When this valve is defective, water can leak out of your dishwasher. If it doesn’t let enough water in, your dishes may not be cleaned correctly! Fixing the dishwashers inlet valve is an easy project for the DIYer.

    For An Easier & Safer Repair Call West Coast Chief

    It all sounds like such fun! If you love tinkering with electronics and mechanical stuff, then it may be your idea of a good time to spend a Saturday afternoon on the kitchen floor, surrounded by testing equipment and dishwasher parts.

    Otherwise, abandon the notion of a DIY water inlet valve repair in the interest of saving a few bucks. Call us at West Coast Chief repair instead. Well determine where the problem lies after all, it may not be the dishwasher water inlet valve, or it may be much more than the inlet valve.

    Once we diagnose the malfunction, well offer an affordable solution to meet your budget repair or replacement, depending on the condition and age of your dishwasher. And in most cases, well have your dishwasher running like a champ by the end of our service call.

    Read Also: Dishwasher Will Not Turn On

    Add Soap Directly Inside The Machine

    If the cup wont open up anymore like it should, just add soap inside the machine directly with the door fully open .

    For the most part, you can wash for years with a broken dispenser by simply tossing soap into the bottom before turning it on each time you have some dishes to wash.

    The only downside is that it may not clean as effectively as you are used to.

    But why?

    It is because the detergent packs may dissolve a little quickly at the pre-wash step meaning it might not have adequate soap during the main wash stage of the cycle.

    The good news is that the pre-wash rinse portions tend to be too short to fully dissolve the packet in most cases so throwing soap in there is the most practical workaround for a broken soap dispenser.

    Try it- If it works and you get decently washed dishes, you can be doing this until you decide on the way forward regarding repairs.

    Signs Your Ge Dishwasher Isnt Getting Enough Water

    How to Fix a Bosch Dishwasher With Standing Water (It was the Water Inlet Valve)

    A GE dishwasher not filling with water typically presents with two signs:

  • Dirty dishes after a wash cycle
  • No sounds of water in the machine
  • An adequate water level in your dishwasher should reach the heating coil or middle hub, where the spray arm is anchored. We recommend these steps to determine the correct water level in your dishwasher:

  • Begin a wash cycle
  • When you hear the dishwasher stop filling with water, open the door
  • If the water level is below the middle hub by more than half an inch, your dishwasher may not be getting enough water
  • When you have a GE dishwasher not filling with water, there are usually three main causes. Well help you troubleshoot a GE dishwasher low water level issue.

    Recommended Reading: Stainless Steel Dishwashers On Sale

    Dirty Water Supply Line And Inlet Valve

    Many refrigerators come with an ice maker and a dispenser. This is likely to happen if you have a Whirlpool fridge or a similar brand. The dispenser and ice maker is a fantastic feature, but they can cause leaks in the refrigerator.

    The ice maker and dispenser hardly leak, but the water pipe connecting them can leak. A dirty water supply valve or leaky inlet valve is usually the component if the leak starts from under the fridge.

    To fix this issue, you need to check the water supply from its source to other components. Therefore, hiring an expert is always better.

    Heres how to fix a leaky fridge caused

    • Turn off the fridge for safety reasons.
    • Find the water supply valve and check thoroughly. Youre checking for visible cracks and confirming its connection with the line.
    • If theres a crack in the pipe, replace it with a similar one. You may need to remove the existing line to buy the exact size.
    • If theres a problem with the connection, call an expert to avoid further damage.

    Dishwasher Wheels Fall Off

    Wheels fall off everytime I pull the bottom rack in or out

    remove the tray and look at the wheels to be sure they are completely attached to the tray itself. If they are spray them with PAM or another cooking spray product to lubricate them.

    Posted on May 18, 2009

    SOURCE: dishwasher lower spray arm falls off

    These parts can be replaced easily and reasosnably cheaply for example the top spray arm is about £20.00p. But you need the back water feed tube as well as the lower spray arm which should come as one package. . You shouldnt have to pay more than £30.00p + p& p. Hope this helps.

    Posted on May 19, 2009

    did you solve this. we have the same problem. the piece that the arm is connected to is slightly broken. I dont want to pay for a service call. let me know what you did.

    Posted on Sep 10, 2009

    SOURCE: Dishwasher falling forward

    Open the door and look up at the leading edge of the should see two metal eyelets that may or may not need to be bent up or swung into position. Take two sheetrock screws and screw one into each eyelet up into the underneath of your countertop that will hold it in place

    Posted on Oct 05, 2009

    the clips come with new wheels, they should cost about $4 for four, I would replace all wheels on the lower rack

    Posted on Nov 17, 2009

    Tips for a great answer:

    Upload an image from your computer

    Draw a box over the problem!!

    Complete. Click Add to insert your video.

    You May Like: Dishwasher Is Leaking From Bottom

    Water Inlet Valve Clogged

    Problem: One possibility for a GE dishwasher not filling with water is a clogged water inlet valve. The water inlet valve allows water to flow into the dishwasher during a wash cycle. If you wonder why theres no water going into my dishwasher, it may be because the inlet valve is clogged with debris.

    Solution: Given the complex location of the water inlet valve in your dishwasher, a professional service can best assess if the valve can be cleaned or if it should be replaced.

    Frigidaire Refrigerator Ice Maker Kit

    Endurance Pro 425458 Dishwasher Water Inlet Valve Replacement for Bosch ...
    Part Number IM116000

    Replacement icemaker kit is used on many models of Frigidaire refrigerators manufactured from 2001 to the present. This ice maker kit included the following parts, the icemaker with an crescent shape ice cube mold/tray, inlet water valve, a white ice bucket, water fill tube harness, hardware for mounting and installation instructions to complete the repair. Please enter your model number to insure that this part will work on your particular model. Always unplug or disconnect the electrical power source to the fridge before attempting to replace any parts.

    You May Like: How To Install Ge Dishwasher

    Confirm Your Replacement Parts

    Because this particular Bosch Integra dishwasher has had many revisions over the years, I highly recommend that you physically examine the inlet valve to visually confirm that what you are about order matches your current part. Speaking from a personal experience, there is nothing worse than taking apart the dishwasher to find out that your new replacement part does not match the old one.

    It will only take about 20 minutes to check:

  • Turn off electricity and water
  • Remove the toe kick panel by unscrewing two Phillips head screws
  • On the left side, you should see a water hose connection to the dishwasher. DO NOT remove the hose
  • You should see two Torx screws holding down the inlet valve bracket. Remove these screws using a Torx T20 bit.
  • Detach the inlet valve+bracket+hose connection assembly by gently lifting the bracket from the dishwashers plastic base. You may have to push the insulation blanket out of the way
  • Take a picture of the inlet valve to capture the part #
  • Are Baby Bottles Dishwasher Safe

    Yes! Baby bottles from most major bottle manufacturers are perfectly safe to put in the dishwasher. This is true for plastic and glass bottles.

    However, you want to put all the parts on the top rack to avoid any melting from being too close to the heating elements.

    The FDA has banned the use of BPA in the making of baby bottles so parents dont need to worry about harmful chemicals leaching into the milk or formula as they feed their babies.

    Are Baby Bottle Nipples Dishwasher Safe?

    Nipples are dishwasher-safe. The best way to clean the nipple of a bottle is by using a bottle basket.

    Bottle baskets have compartments for all the components and keep them upright while washing. This allows the nipples to be cleaned more thoroughly and become safer for use.

    You May Like: What To Do When Dishwasher Wont Drain

    Recommended Reading: Black Dishwasher With Stainless Steel Tub

    Dishwasher Float Switch Stuck

    Problem: The float switch detects how much water is in your dishwasher. Its attached to a larger float system that rises and falls with the water level in the tub. Once the water reaches a certain level the float switch is activated and signals the water inlet valve to restrict the flow of water.

    Solution: If a GE dishwasher flood float location is stuck too low it wont properly detect water levels and may signal the water inlet valve to close prematurely. This will cause a no water in dishwasher issue. A float switch thats stuck may be malfunctioning and will need to be assessed for replacement.


    Most Popular