Heavy Light Blinking On Samsung Dishwasher

Common Reasons Why Your Samsung Dishwasher Heavy Lights Are Blinking And How To Fix It

Most of the times the issue is pretty small and can be fixed in a couple of minutes by yourself but in the rare chance of a serious issue you should check the appliance properly. But before you go ahead, make sure the appliance is switched off and the plug is out of the socket. Electrical appliances can be dangerous to work with and you should take all safety measures before you interact with them.

Samsung recommends on its own website that lights can blink during normal usage as well so you should only check if there is a problem and the appliance isnt working properly.

Normal Heavy Quick And Normal Heavy Smart Auto

This combination is also related to a lack of water in the appliance. You can check the inlet valves and whether there is any blockage there. Similarly you should check if there is proper water supply or not. There can also be a leakage issue because of which most of the water is not able to reach the dishwasher.

To check if the issue still persists, you can run an empty cycle using some detergent after emptying the appliance. If still the error is showing or there is some issue with the machine you will have to call for some professional help.

How To Fix Samsung Dishwasher Flashing Smart Auto And Heavy

Samsung offers a wide range of dishwasher models that all come with exhilarating features. Even though they might be a bit pricey, the durability, reputation, and innovative features make the price all worth it. But sometimes, even the best products can run into trouble.

There have been a number of complaints being made on the internet by users who were facing issues with their Samsung dishwasher.

These users claimed how the Samsung dishwasher is flashing on smart auto and heavy buttons, leaving them confused as the manual doesnt describe what to do next properly.

If you have also found yourself in somewhat of a similar situation, then this article should be of great help to you. Using this article, we will be giving you a list of ways how you can fix the smart auto and heavy buttons flashing continuously.

Here are all of the possible troubleshooting steps for the issue.

The first step in troubleshooting your Samsung dishwasher for blinking lights is looking for a stuck button. This is common when your dishwasher has been in use for a long time. The buttons eventually wear out and are prone to get stuck when pressed too hard.

To find the stuck button, turn your dishwasher off then go through all the knobs and buttons besides the digital panel. Wiggle them a little until theyre back to the normal position.

If a button is jammed, you can use a stick to gently lift it up . Avoid pressing buttons too hard or hitting them with dishes or cutlery.

Don’t Miss: Kenmore Elite Dishwasher Parts Upper Rack

Samsung Dishwasher Normal Cycle Light Flashing

When it comes to washing various items, the normal cycle on a Samsung dishwasher is probably the most used cycle of them all, as this cycle is more for cleaning general items of everyday use rather than for very specific types of washes. The versatility that this cycle offers is one of the reasons users find themselves selecting the option for most washes, but what do you do if the normal cycle light is flashing for no apparent reason?

If the normal cycle light is flashing on a Samsung dishwasher, this is an indication that a leak sensor has detected water somewhere within the dishwasher that it should not be. You will then need to find the source of the moisture before the light will stop flashing.

If the normal cycle light is flashing on its own, you can be sure that the indicator message is that a leak sensor has detected moisture. However, if the normal cycle light is flashing with other buttons, this can mean a different message entirely. Be sure to pay close attention to other buttons blinking with the normal cycle light, as this could mean hot water is present, a button is stuck, or the thermostat has short-circuited.

Heavy Models With Express 60 Drain Issue

This error occurs when there is too much water in the dishwasher. You have to inspect the sink to dishwasher connection first. When this checks out, inspect the drain hose next. After that, run water in the sink that is connected to the dishwasher. Crain the drains and sink to clear all debris that may be causing blockages.

Don’t Miss: Water From Dishwasher Coming Up In Sink

How To Reset Your Samsung Dishwasher In 4 Easy Steps

Are error codes flashing brighter on your Samsung dishwasher than your fairy lights did last Christmas?

Heres how to reset your Samsung dishwasher:

Unlike their other appliances, Samsung dishwashers tend not to have a reset button or functionally. Instead, they rely on the traditional method above.

That being said, resetting might not always fix the issue. Weve covered other fixes in detail below, but make sure you check your manual too.

Dont have it handy? No problem.

Heavy And Quick +: Dishwasher Fails To Heat

Your dishwasher isnt heating water. Dont attempt to fix the problem yourself unless you are a trained technician! The dishwasher cant work at its best unless it heats water, so if the machine is struggling to heat the water, this may be the issue.

Do not try to fix any electric issues unless you are trained as a technician.

You May Like: Samsung Dishwasher Won’t Turn On

Auto: Wrong Pressure Or Temperature

Every dishwasher has a specific water pressure and temperature. If the dishwasher is set to the incorrect water pressure and temperature, it will most likely cause an error with your dishes. To fix this error:

• Confirm that the water pressure and temperature meet the dishwashers needs.
• Be careful not to use flood-safe hoses. Theyre incompatible with Samsung dishwashers.
• Make sure the water supply is ON.

If none of these things work, call in for professional help!

How Can I Run A Diagnostic On My Samsung Dishwasher

There are a number of reasons why your dishwasher wont be working the way it should, and running a quick diagnostic can help you discover the root of the problem. While there doesnt appear to be any integrated technology that can immediately identify the issue, you can generally find out what the root of the problem is by analyzing the situation extensively.

First, check for the drain near the bottom of the tub to ensure that is not clogged. If it is, then take a drain cleaning product and pour it down the drain to clear it out. If this doesnt solve the problem, then check to make sure that the drain hose has not been damaged, as well as the connection between the drain hose and for any air gaps. Generally, there will be error codes or flashing lights displayed on the control panel if there are major issues like this in play.

You May Like: Dishwasher Safe Travel Coffee Mugs

Connect With An Appliance Repair Tech

No in-home service calls. No appointments.

But water is not the only thing that could complete the circuit. Residues from corrosion, molds, and hard water can also complete the circuit triggering the error code.

Therefore, in the case that the error code results from a corroded sensor, cleaning the sensor chamber should fix your dishwasher. To access the sensor chamber, use a half-inch drill to make holes near the sensor, taking caution not to damage the sensor electrodes or float piece. Next, use stuff such as alcohol, CLR, q-tips to get rid of hard water sum and mold.

Finally, seal back the chamber using a thick plastic and sealants that can handle high water temperature.

Auto Normal And Express 60

When these three lights, Auto, Normal, and Express 60, are blinking, it means that some button in your control panel is stuck.

If you are using your dishwasher for a long time, the button will start to get stuck inside the control panel after some time.

Therefore, your dishwasher blinks these lights in your dishwasher. Here is the step-wise instruction to fix this problem in your dishwasher.

Read Also: Bosch 800 Series Dishwasher Black Stainless

Samsung Dishwasher Not Draining Heavy Lights Flashing

You may find that your dishwasher suddenly does not work properly where you find that it is not draining and the heavy light is flashing. What should we do if this thing happens? Here, you are able to read the information about the meaning of this error and how to fix it.

Fixing Samsung Dishwasher Heavy Light Is Flashing

If you find that the heavy light is flashing in your Samsung dishwasher, then according to the Samsung Support website, the meaning of it is because the leak sensor of the dishwasher finds moisture. If this happens, you will find that the dishwasher will turn itself on and then it will not turn off. While it is happening, it will be trying to drain the water away.

If you see there is a leak, then you can fix it by accessing Samsung Support about Samsung Dishwasher Is Leaking for fixing it. However, if you are sure that there is not a leak, you can fix it based on the situation that you are encountering.

If you have done the things above, but nothing can help you, you are able to visit the Support Center of Samsung and then request service.

Fixing Samsung Dishwasher Heavy Light Is Flashing

If the heavy light is flashing in your Samsung dishwasher, the meaning is that in the dishwasher there is too much water. Often, it is related to a drain issue. So, you are able to do the things below.

Fixing Samsung Dishwasher Heavy, Delicate, Quick Light Is Flashing

Fixing Samsung Dishwasher Heavy, Delicate, and Smart Auto Light Is Flashing

Heavy And Delicate Failing Heater

A failing heater means that the dishwasher will not work properly. Always empty the dishwasher and run a normal cycle if this happens. If you try this a few times without any success, then call for a technician to fix it.

The heavy delicate error means that the heater is failing. To inspect the heating element, you need to unplug your dishwasher and pull it from underneath the counter. On the right side of the dishwasher, youll notice a metal panel. You can remove this and inspect the heating element for any corrosion, blistering, or cracks.

Another quick fix would be to:

• Empty the dishwasher.
• Add detergent, and then run a normal cycle.
• If the error still occurs, switch off power to the dishwasher at the circuit breaker and switch it back on.

You May Like: My Dishwasher Didn’t Drain

Normal And Smart Auto

When both the normal and smart auto lights are blinking on your Samsung dishwasher, the water is too hot. Check to ensure that the hot water supply is not set at a temperature above 176 degrees Fahrenheit. Next, empty the dishwasher and let is sit open for 15-30 minutes. When the time has passed, add detergent and run a normal cycle. If the lights continue to blink, you should shut off the circuit breaker for the dishwasher and contact Samsung support.

Why Is The Normal Light Of Your Samsung Dishwasher Blinking

A normal light flashing by itself means that the sensor has detected a leak or there isnt enough water in your dishwasher.

If the normal light blinks along with other lights in the panel, this indicates a hot water error, stuck button error, or short-circuited thermistor.

First, try unplugging your dishwasher for one minute, plugging it back in, and then rebooting it.

If the error remains, you can do one of these things:

• Check for installation errors or damaged parts
• Clear the clogs that may be causing the leaks and water supply issues
• Replace the malfunctioning heating components

If you need more help in troubleshooting, keep reading.

You May Like: Bosch 800 Series 18 Inch Dishwasher

Moisture Has Been Detected

If you have just the heavy light blinking, excess moisture has been detected in the machine.

The first thing to check for is leaks. If you find water leaking from the dishwasher, you should refer to the Samsung guide for dealing with dishwasher leaks.

If you cannot find any signs of a leak, it may be that water has splashed onto one of the sensors and needs some time to dry.

Additionally, suppose the dishwasher has recently been connected to the garbage disposal. In that case, you should ensure the garbage disposal cap has been removed and that you havent accidentally overfilled the detergent that has spilled outside the dispenser.

Samsung Dishwasher Light Flashing

Categories Dishwasher, Home and Kitchen, Samsung Dishwasher

When it comes to dishwashers new and old, there are indicator lights that help to relay exactly what is going on or what is needed with the appliance. However, if you have a Samsung dishwasher and there are lights flashing for unknown reasons, what might they mean?

Flashing lights on a Samsung dishwasher could indicate a water leak, too much water within the dishwasher, that there is not ample water pressure, that the water temperature is too high, or that there are obstructions within the drain hose, sump, filter, or the drain itself.

The beauty of lights on appliances such as dishwashers is that owners no longer have to try and blindly deduce the issues that their device is experiencing. These light sequences are put in place to inform owners of problems the appliance has so that troubleshooting methods can be more informed and thus, more effective. If there are lights flashing on your Samsung dishwasher, read on to find out just what they mean and what you can do to stop them.

You May Like: Kenmore Elite Dishwasher Troubleshooting Guide

Normal Delicate And Quick Lights Are All Available

Another possible dishwasher information code is a combination of the control panels Normal, Delicate, and Quick lights. The second meaning of this information code is that the dishwasher is using excessively warm water.

Maintain a temperature of no more than 176 degrees Fahrenheit in the water supply going into your dishwasher. If this is the case, lower the temperature of the water that is being used by the dishwasher. If, on the other hand, the water is not too hot and an information code is still displayed, a repairman will be required.

Normal Heavy And Express 60 Lights

An information code may appear on your dishwasher as the Normal, Heavy, and Express 60 lights blinking. This information code indicates that the dishwashers thermistor has short-circuited.

If your thermistor has short-circuited, you will need to replace the thermistor or the dishwasher entirely. This will require a repairman.

Recommended Reading: Ge Dishwasher Won T Start But Has Power

Also Check: Tommee Tippee Bottles Dishwasher Safe

Samsung Dishwasher Buttons Not Working

If you find that buttons on your Samsung dishwasher have stopped working, dont panic! There is an easy fix for the problem.

The Samsung dishwasher has a feature called the Half Load Option button, which lets you use less water and energy by running the washer on half the load size.

Buttons may stop working if they are accidentally pressed too hard or with too much pressure, or just dirty. When buttons become dirty, it affects their sensitivity and can cause them to stop working.

To solve this problem, simply take a cotton swab dipped in alcohol and gently clean each button individually. After cleaning each button, test it by pressing firmly on it to make sure that the buttons work again without any problems.

Unplug The Dishwasher And Re

You have to unplug the dishwasher from the power and wait for a while after this while if there is any issue related to this occurs then it may eliminate in that pulse of time and then you have to re-plug the dishwasher and the check whether the lights are blinking or not and if you want to know my point of view.

Then you have to trust that the dishwasher is now getting right and there is not any light now start blinking because the issue with the lights get cleared and there is now not any issue with the dishwasher and you feel easy to use it again.

Don’t Miss: Lg Black Stainless Dishwasher Reviews

Cause : Faulty Heater

Sometimes the heater of your Samsung dishwasher can act weirdly if you feel that the reasons behind the hard blinking lights of your Samsung dishwasher lie in the heater getting defective.

Then you must follow the three-step procedure we have listed for faulty thermocouple and temperature sensors.

The dishwashers heavy lights indicate a heater error that needs immediate action. Also, checking up on the control board will help identify the problem.

Also Check: Dishwasher Leaking Bottom Of Door

Quick Or Smart Auto Or Express 60

A blinking quick, express 60 or smart auto light means you have a problem with the water supply, usually either the water pressure or temperature. Your Samsung dishwasher needs to be able to consistently get a water supply of 120 to 149 degrees Farenheit. The water pressure must also be between 20 and 120 pounds per square inch .

There are a few possible reasons why you might be experiencing an error with your water pressure or temperature. You may have a bad water valve that needs replacing, a flow meter error, or a clogged inlet screen. If you are unable to verify the source of the issue on your own, you should contact Samsung support.

Recommended Reading: Dishwasher Rinse Aid Not Dispensing