Thursday, February 15, 2024
HomeKitchenaidHeating Element For Kitchenaid Dishwasher

Heating Element For Kitchenaid Dishwasher

Uninstall The Old Heating Element

KitchenAid Dishwasher Heating Element Replacement W10703867

Now you are ready to access and remove the old heating element.

  • Remove the Lower Dish Rack
  • Open the dishwasher and remove the lower dish rack. You will need this space to access the heating element underneath. If you want, also remove the upper rack.
  • Close the Dishwasher Door
  • Close up the dishwasher and prepare to work underneath it.
  • Lay Your Dishwasher on Its Back
  • Carefully lay your dishwasher backward, to lie on its back. You may need another towel.
  • Remove the Wire Nuts
  • You will see a ring if wire nuts. Use your crescent wrench to remove them and detach each from the wires.
  • Tip the Dishwasher Upright
  • With the nuts removed, tip your washer back upright to access the inside.
  • Open up the dishwasher again to access the element.
  • Pull Up the Heating Element & Release the Clip
  • Lift the heating element gently and find the clip that holds it into the black tub underneath. Release the clip inside the tub.
  • Pull the Heating Element Free
  • You can now remove and throw away the old heating element.
  • Check Out These Best Drying Dishwashers

    When shopping for a dishwasher, you will want to make sure that it is going to dry your dishes. Not all dishwashers are going to completely dry the plastics, but all other dishes should be dried. Bosch, KitchenAid, Thermador, and Maytag are known for how well their dishwashers operate. Here are a few options of the best drying dishwashers.

    Bosch SHP878WD5N

    Kitchen-Aid KDTE334GPS

    This KitchenAid dishwasher is 39 dBA which has a third rack and costs $1034.99. The third rack adds 35% more space. This flat rack allows you to put spatulas and other flat and long utensils on it. The second rack offers a bottle wash option. It has spray nozzles that will be able to give a precise clean to your tall water or even baby bottles. The nozzles are adjustable so it gives you the flexibility to adjust them when needed.

    Thermador DWHD770WFP

    Maytag MDB8979SFZ

    This Maytag model has a power blast cycle. This is a heavy duty cycle that helps remove stuck on food. This cycle has an extra hot temperature and steam which will ensure that all dishes will come out clean. Also, this dryer has a power dry option. This option will decrease humidity to dry your dishes. It is always suggested to use rinse aid to help with this process, but this option will still dry your dishes 50% better without it.

    Kitchenaid Heating Element Parts

    Dryer heating element. If your dryer does not heat first check for a blown thermal fuse on the blower housing before replacing the heating element. In most cases the heating element will have a break in the element if defective. *May need wire connector to install heating element.

    OEM Part – Manufacturer #279838

    The heating element and many other parts can be tested using a volt/ohm meter which is a handy item to have in any do it yourselfers tool box.

    Read Also: Cleaning Dishwasher With Citric Acid

    Faulty Kitchenaid Dishwasher Parts

    If all else fails, its possible a faulty part is responsible for a KitchenAid dishwasher not drying dishes.

    The following part malfunctions can leave dishes wet and require professional replacement:

    • Broken vent: Many dishwashers use a vent to release moist air, aiding in drying. If the vent fails to open, damp air can remain inside the dishwasher, leaving dishes wet.
    • Failed fan motor: A fan is often used to enhance the drying process by pushing moist air out of the vents and drying water droplets. If the fans motor fails, or the blades dont turn smoothly, water will remain on dishes and glassware.
    • Faulty Heating Element: Some dishwashers also have a heating element that heats the air inside to create condensation and promote better drying. A KitchenAid dishwasher heating element not working means no heat will be produced, leaving more moisture on dishes.

    The technicians at Apex Appliance Service can fix a KitchenAid dishwasher not drying or resolve any other malfunction. Call us when you need a dishwasher repair service and for all your appliance needs!

    Resistance Of Kitchenaid Dishwasher Element

    TESTED Whirlpool KitchenAid Dishwasher Heating Element Heater Part ...

    Resistance in ohm of the heating element for a kitchenaid model kudio1ilwh4

    my wife shut the water off to the dishwasher and forgot to turn it back on and then used the dishwasher.the heating element went on but there was nop water.when we turned the water back on,the drying cycle does not work.i would think that the element needs to be changed or is there a relay on the computer board?this is a two year old Jennair unit.any suggestions?

    You would need to look at the wireing diagram and find out if there is any thermostats that I’m sure there are. You would need to find out if they are working properly.

    Posted on Jul 13, 2007

    SOURCE: Zanussi ZSF6160 Water not heating

    Posted on Aug 16, 2007

    SOURCE: My kitchenaid dishwasher heating element

    Posted on Oct 11, 2008

    Same thing just happened to my yesterday on my Kenmore. Expert help needed.

    Posted on Dec 04, 2009

    Tips for a great answer:

    • – Answer the question.
    • – If you need clarification, ask it in the above.
    • – Better answers use proper spelling and grammar.
    • – Provide details, support with references or personal experience.

    Upload an image from your computer

    Draw a box over the problem!!

    Complete. Click “Add” to insert your video.

    You May Like: Non Stick Cookware Dishwasher Safe

    Not Using Dishwasher Rinse Aid

    Rinse aid is a liquid that should be added to the dishwasher to enhance drying function. This important addition alters the surface tension of water droplets, enabling them to run off dishes with greater ease and improving drying. Add rinse aid to the dishwashers designated dispenser before starting a wash cycle, filling it to the top. If your dishes still arent adequately dry, refer to your user manual to determine the optimum amount of rinse aid. Most dispensers can be adjusted to accommodate more as needed.

    How To Test A Dishwasher’s Heating Element:


    Use our step-by-step dishwasher repair guide to learn how to test your heating element. Once you have diagnosed the problem we have the OEM replacement heating element that fits your appliance.

    Disconnect the power source to your dishwasher before you conduct this or any other test. Either unplug the unit from the wall outlet, remove the appropriate fuse from the fuse box, or flip the appropriate breaker in the circuit breaker panel.

    Locate your dishwasher’s heating element. Open the dishwasher door and look into the tub. It is the thin, circular tube at the base of your dishwasher. It may or may not be covered. If it is covered, remove the lower dishrack, and then remove the cover.

    Your heating element is going to have two metal terminals. One at each end. Each terminal reaches downwards, into the base of the dishwasher. Mentally mark the area where each terminal enters the base of the tub.

    Now you need to gain access to the heating element’s wiring. You can do this by first removing the lower kickplate panel of the dishwasher. There will be at least two screws holding the kickplate panel in place. They are located either on the top or the bottom of the panel. If the screws are located on the top, you may need to open the dishwasher door in order to gain access to them. Close the door to remove the panel, though.

    For more information about dishwasher heating elements:

    Don’t Miss: Ge Dishwasher Spray Arm Fell Off

    Heated Dry Option Not Selected

    A KitchenAid dishwashers Heat Dry function is automatically engaged during a Normal wash cycle. However, some wash cycles, like Quick or 1 Hour require a manual selection of the heated dry function. When using these cycles, make sure you select the Heat Dry option before starting a wash cycle.

    Some KitchenAid dishwashers have a ProDry option in addition to Heat Dry.

    A KitchenAid dishwasher ProDry vs heat dry function uses a combination of condensation drying along with pulsing heat and fans to result in dryer dishes. If your dishwasher has this function, select the ProDry function along with Heat Dry for improved drying performance.

    Plastic Items Dont Dry Well

    KitchenAid Dishwasher Repair How to replace the Heating Element

    Many dishwashers employ condensation drying methods that use the heat absorbed by each item to make water droplets slide off dishes and glassware. However, plastic doesnt retain heat as well as other materials, like glass or ceramic. Consequently, condensation drying is not as effective for plastic items, leaving them wetter at the end of a drying cycle.

    For dryer dishes, we suggest limiting the amount of plastic in the dishwasher or hand washing those items instead.

    Recommended Reading: What Is The Best Dishwasher On The Market

    Taking The Guesswork Out Of Your Repairs

    With our Fix app model plate image recognition technology, we’ll recommend the parts guaranteed to fit your appliance. Simply snap a photo, and we’ll take care of the rest.

    “I love love love this app. It’s so nice to have useful information on all of my household appliances and devices in one place.”

    Install The New Heating Element

    Unpack your new heating element and prepare to install it in place of the old element.

    • Wet the New Seals with Rinse Aid
    • The seals of the new heating element need to be lubricated. For the dishwasher, the best substance is actually commercial rinse aid. Squirt a little Jet Dry or other brand of rinse aid onto the seals.
  • Push the Leads Through the Matching Holes in the Tub
  • Line up your new heating element and then push each appropriate set of leads through the matching holes in the floor of the dishwasher or tub.
  • Attach the Mounting Clip
  • Remember the clip that attaches the element to the tub? Reattach it.
  • Lay the Dishwasher on its Back
  • Now its time to look at the underside. Very carefully lay your dishwasher on its back again and take a look at those wire leads pushed through
  • Reattach the Wire Nuts
  • Use the wire nuts to fasten the pushed-through element leads.
  • Push Wires Into Element Leads
  • Push each wire tab ends into each nut-encased lead. Make sure not to cross wires so that each nut secures the leads coming through the matching hole in the dishwasher floor.
  • Set the Dishwasher Up
  • Push your dishwasher back upright, it will stay that way now until the end of the repair.
  • Check for Leaks
  • Last but not least, fill the bottom of your dishwasher with a pitcher of water and check for leaks. if the nuts do not leak, then you are good to go.
  • You May Like: Kitchenaid Dishwasher Upper Rack Clips

    Is The Heating Element Working Properly

    To test the heating element run a cycle with the Sanitize option selected. If the Sanitize LED is on steady , there is no problem with the dishwasher’s heating element. If the Sanitize cycle has completed, the dishwasher has reached its max temperature, therefore the heating element is working properly. Today’s dishwashers are more energy-efficient and the key to optimal drying performance is proper loading and the use of Rinse Aid.

    If the Sanitize LED is blinking , there may be a problem with the dishwasher’s heating element and service will need to be scheduled.

    Don’t have the Sanitize option?

    To test the heating element run a “1-hour” wash cycle and ensure the “Heat Dry” option is selected. With the “Heat Dry” option selected the total cycle time should take about 1.5 hours. Once the cycle has finished check to see if the dishes are warm. If the dishes are not warm there may be a problem with the dishwasher’s heating element and service will need to be scheduled. Today’s dishwashers are more energy-efficient and the key to optimal drying performance is proper loading and the use of Rinse Aid.

  • This page has no tags.
  • How To Replace Your Dishwasher Heating Element

    WHIRLPOOL Dishwasher Heating Element, Fits Brand Ikea, Jenn

    Your dishwasher is a remarkably self-contained machine. Not only does it wash, rinse, and dry your dishes it also has an internal heating system. The dishwasher heating element can heat water or create heat to dry dishes. The heating element is an essential part of having clean dishes with a basic kitchen setup. The heating element ensures your dishwashing water is boiling hot, and is also why plastics notoriously can only go on the top shelf.

    But when that heating element burns out, the signs are unmistakable. Your dishes may be less clean because their wash water is not as hot. Your dishes may be cold and still dripping wet when you open the dishwasher because the element isnt supplying that toasty drying heat. So if your dishwasher heating element has stopped working, heres how to replace it.

    Instructions are generalized to cover the average dishwasher in USA, and instructions can vary by model.

    You May Like: Dishwasher Air Gap Installation Cost

    Unloading Clean Dishes Out Of Order

    Do you unload your dishwashers top rack first? This could be why your KitchenAid dishwasher doesnt dry dishes. Unloading the top rack before the bottom allows any residual water to fall on the rack below, making dry items wet again.

    When unloading the dishwasher, always unload the bottom rack first. This way, any remaining water on top rack items will fall on an empty rack below.

    Dirty Dishes Are Overcrowded

    Overloading is one of the most common reasons your dishwasher leaves dishes wet. Loading too many dishes limits airflow inside the dishwasher. Without adequate space for air circulation, the dishwashers vents, fan or heated dry functions wont be as effective. Avoid overcrowding by leaving enough space between each item that they dont touch each other.

    Here are some rack-by-rack loading tips that can also improve drying:

    • Upper rack: Reserve for bowls, cups, and glassware. Load items upside down and at an angle for better draining.
    • Bottom rack: Designed for dishes and servingware. Place one dish per slot to leave adequate space between each. Remove large food particles before loading, as a dishwasher wont drain water if the drain is clogged with food.
    • Silverware basket: Avoid nesting by alternating forks and spoons next to each other.

    Recommended Reading: Sink Backs Up When Dishwasher Runs

    Dishwasher Does Not Heat The Water Or Dry The Dishes

    Hi Everyone, I am trying to get some help with a KitchenAid Dishwasher, Model KUDE60FVSS2, that is having problems with heating the water and drying the dishes.

    I read other posts and already have done the following:

    1) Replaced Heating Element

    2) Replaced High Limit Thermostat

    3) Rebooted the Control Board

    3) Visually Inspected Control Board

    What continues to happen is:

    1) During Normal Wash cycle/Hi-Temp Scrub/Sani-Rinse: The water stays cool

    2) Heat Dry: The heating element does heat up some – but it does not get hot like it used to.

    So, any idea why the water not heat up during any of the cycles? My initial thought was the Hi Limit Thermostat, but I checked it with a Multi-Meter and it has continuity . And then I replaced it just to be sure.

    Is there an actual thermostat on the dishwasher?

    Is there anything else to try before looking at the Control Board?


    Most Popular