Friday, September 29, 2023
HomeEditor PicksGe Triton Dishwasher Not Draining

Ge Triton Dishwasher Not Draining

Check The Drain Solenoid Kit

GE Dishwasher Not Draining – How to Fix DIY

If you still havent found the cause of your GE dishwasher not draining, the next component to check is the drain solenoid. The solenoid opens the drain valve so that water can drain out of the dishwasher.

To check if it is faulty:

  • Locate the drain solenoid.
  • Check for any obvious signs of damage.
  • If it is damaged, replace it. If it is not damaged, youll next need to check the drain valve.
  • Ge Triton Xl Dishwasher Will Not Drain

    Model numbers starting with GSD, such as GSD6660G00SS.

    Most no-pump-out? issues are solved by cleaning out a plugged air gap, drain hose or disposer. However, on GE dishwashers with a rear filter, no-pump-out? may also be caused by a malfunctioning piston and nut assembly, located underneath the rear filter. To save time, effort and repeat service calls, always inspect the piston and nut assembly when diagnosing a no-pump-out complaint.

    The piston and nut assembly has an integral check valve, shaped like an umbrella, which closes the collection chamber inlet during pump out. If the check valve is damaged, held open by debris or assembled upside down, water will circulate inside the tub instead of going down the drain. Cleaning a clogged valve or replacing a defective one will solve the problem. This check valve is very inexpensive, especially given that its a GE. Come git you one.

    If the piston and nut check valve assembly is functioning normally, verify operation of other parts of the drain system. Those parts include the dual pump check valve on models with a three port collection chamber, the adapter check valve at the outlet of the collection chamber, the solenoid/gate valve mechanism on the main pump and both the main pump and dual pump, if equipped.

    To learn more about your dishwasher, or to order parts, .

    Damaged Drain Pump Impeller

    The drain pump on your GE dishwasher uses an impeller to push water through the drain hose and down into the drain tube. A damaged impeller will cause water to pool at the bottom of your dishwasher.

    In some GE dishwasher models, you can replace an impeller independently. Find out how to do this by watching this video:

    Other models will require you to replace the entire drain pump if the impeller malfunctions.

    It’s also important to check if the drain pump itself is malfunctioning as this can also prevent your GE dishwasher from draining properly.

    Use a multimeter to perform a continuity test on your drain pump. If it shows a reading of 200 ohms, then it’s not the problem. If it fails to show any reading, then you’ll need to replace it.

    Also Check: Sink Tailpiece With Dishwasher Connection

    How I Fixed My Ge Triton Xl Dishwasher Wont Drain

    Normally all electrical appliances experience wear and tear with time, the only way out is steady maintenance. Fixing all faulty parts that need fixing and replacing damaged parts that do not pass the continuity test to avoid any more damage to the dishwasher.

    Once your GE Triton XL dishwasher is not draining, there are dozens of possible reasons that could cause that. But More importantly, know how to troubleshoot a Triton XL dishwasher, you can do so by downloading the troubleshooting guide for the Triton XL dishwasher model.

    How Do I Force My Ge Dishwasher To Drain

    Our GE Triton XL dishwasher was not draining and cleaning dishes but ...

    If youve noticed that your GE dishwasher isnt draining, the first thing you should do is make sure that none of the pipes under the sink are backed up. In order to do this, you need to turn off the water supply and wait a few minutes for all of the water to drain from the pipes. After this, turn on the water again and check to see if your GE dishwasher still isnt draining. If it is, then you may want to force it to drain by opening one of the dishwasher doors and letting it run until it drains completely. On some models all you do is Press and Hold the start button for 3-4 seconds, and it should start to drain.

    Recommended Reading: How Much Cascade Liquid To Use In Dishwasher

    Inspect The Drain Pump

    The next component to check is the drain pump. The drain pump is one of the core components that helps a dishwasher drain. When the drain pump motor stops working, then the dishwasher will not be able to drain.

    To inspect the drain pump:

  • Turn the power off to the dishwasher.
  • Locate the drain pump .
  • Use a multimeter to check the drain pump motor for continuity.
  • If the motor has continuity, then it is working fine, and you can move on to checking the next component. However, if it doesnt have continuity, this means it is defective and will need to be replaced, as they are not repairable.
  • Choose The Right Dishwasher Detergent

    Ensure that youre always buying a brand that is dishwasher-safe and compatible with your GE dishwasher model. If youre not sure what brand you should use, you can always check the manual orcontact customer support to check which products would be compatible with your dishwasher.

    Also, remember not to use too much detergent thinking it will improve the cleaning power. Instead, you could end up with a product buildup that is compromising the draining process.

    If youve accidentally added the wrong brand, and youve noticed only after youve run a wash cycle, theres no need to panic.

    All you need to do is wipe the inside of the dishwasher with a lint-free cloth to remove any suds residue, as well as the soapy tray . Once youve removed the suds, you can run a quick 30-minute program with an empty dishwasher to get rid of any detergent residue with hot water.

    Recommended Reading: Door Seal For Kitchenaid Dishwasher

    Defective Drain Check Valve

    As we briefly discussed in the beginning, the drain can become clogged with debris. When checking this area, be sure to also check the drain valve.

    Over time, this part can become clogged, or even stop working all together.

    First, youll want to clean the valve if there is debris present. If youve already done this, but the unit still wont actuate, youll need to replace the valve.

    Again, these parts are not repairable, so youll need to buy a new one and replace.

    Check The Garbage Disposal

    How to repair a dishwasher, not draining / cleaning – troubleshoot GE QuietPower 3

    If your dishwasher is hooked up to the garbage disposal , you may not have removed the plug that is in it. This will prevent water from draining out of it. Dishwashers that are not connected to garbage disposal need the drain plug left in place.

    If you have a dishwasher connected to your garbage disposal, then you need to:

  • Dont forget to remove the drain plug.
  • Disconnect the drains hose from garbage disposal and clean both ends to ensure proper drainage.
  • If the dishwasher doesnt drain, you may need to reattach the drain hose. Turn your dishwasher on and see if this solves the problem.
  • Read Also: Are Hydro Flask Dishwasher Safe

    How To Reset A Ge Dishwasher

    Some GE dishwashers have a manual reset button that can be used if the dishwasher is not draining and has power. To do this, unplug the dishwasher and remove any objects from the lower spray arm area. Then, locate the reset button on the side of the dishwasher next to the power cord. Press and hold down on it for 5 seconds.

    What Do You Do If Your Dishwasher Isnt Draining

    Once your dishwasher stops draining, what to do is open the front panel of the dishwasher and check. Pull out the screen and check for junks and debris all over also remove the filters in case of dishwasher models that are using removable fine and ultra-fine filters.

    If you see any piled-up debris around the filter, clean the filter thoroughly with soap and warm water and fix it back. Run a cycle on your dishwasher and see if its draining or still not draining water after a complete wash cycle, then you will know its a pump issue and needs to be fixed.

    A faulty drain pump can be fixed and in such a case, you may need to call on the attention of a specialist to help you fix a new one. A clogged drain hose under the sink does also affect a GE dishwasher draining function, so do clear all draining pumps and hoses under the sink.

    Read Also: Samsung Dishwasher Won T Drain

    How To Fix A Ge Dishwasher Not Draining

    A dishwasher that cannot drain is a problem you will want to get fixed quickly. Not only is there a risk of further damage caused by leaking water, but dirty dishes will also start piling up in the sink. Fortunately, this guide is here to help you.

    Most of the time, the dishwasher will not be draining because of a defective drain pump. However, before you access the drain pump, check that the drain hose is connected properly and not blocked. The filter and sump should also be checked for debris. If the dishwasher still will not drain, there may be a defective solenoid causing the issue.

    Go through the checks below to diagnose and fix the drainage issue in your GE dishwasher.

    This guide applies to most GE dishwasher models, including the following:

    DDW550B-45

    SD4920X66BB

    Check The Drain Valve

    I have GE Triton model GSD5700GOOWW, Dishwasher with ( SER LD716245B ...

    If the drain valve gets clogged up, water wont be able to flow through it properly.

    To make sure water can flow through it:

  • Locate the drain valve.
  • Check to see if it is clogged up.
  • If it is clogged up, clean it out and then test to see if this has solved the problem.
  • If it isnt clogged up, check if it is operating correctly when you try to drain the dishwasher. If it isnt working at all, it will need to be replaced, as it cannot be repaired. However, if it is working, then it probably isnt the cause of the dishwasher not draining, so you can move on to checking the next component.
  • Read Also: How To Clean Jetted Tub With Dishwasher Tablets

    The Dishwasher Is Connected To The Garbage Disposal

    In case your dishwasher is connected to your garbage disposal, this connection could be the source of all your troubles with the drain cycle of your dishwasher.

    Normally, the dishwasher should be connected to the drain line, which makes the entire process much easier. However, if the dishwasher is hooked up to the garbage disposal instead, you may not have removed the plug.

    If the plug in the garbage disposal isnt removed, the dirty water will naturally come back into the dishwasher, since it wont have a way out.

    Cause # : Blocked Sink Drain

    A blocked sink drain can be the reason behind the dishwasher not draining properly. It often happens that homeowners keep on checking their dishwasher while the real culprit is a blockage in the sink drain.

    Solution: Use environment-safe draining cleaning liquids to remove the blockages in your drain. If the problem persists, call a licensed plumber to inspect the situation.

    Also Check: Kitchen Aid Panel Ready Dishwasher

    How To Drain Your Dishwasher

    Many of us have been there before. You open the dishwasher, ready to put the dishes away, only to look down and see a pool of soapy, grimy water standing at the bottom of the machine. Dont call the plumber just yet a clogged dishwasher can sometimes be fixed without the help of a professional. Take control of your train by following these step-by-step instructions on how to properly fix a clogged dishwasher.

    Broken Dishwasher? Need a Pro Now? Book a qualified, local home repair Pro with American Home Shield ProConnect in just a few clicks. . *Available in most major markets. Services vary by market.

    Step 1: Prepare Your Dishwasher

    Before you begin tackling your dishwasher draining issues, make sure youve removed all dishes and silverware from the machine. If they are still dirty, be sure to separate them from your other dishes so that you can return to cleaning them once your dishwasher has been fixed. Youll also want to remove the bottom dishwasher rack for easy access to the machine.

    Step 2: Make Sure Your Dishwasher is Turned Off

    Now that the dishwasher is free of dishes – go ahead and turn off the electricity running to both your dishwasher and garbage disposal. Its very important that you ensure no current is traveling to the machine. Water and electricity dont fair well together, as

    Convection Or Conventional Which Is Better

    GE Dishwasher Won’t Drain

    by AppDoc | March 8, 2022 | Appliance | 0 Comments

    by AppDoc | February 23, 2022 | Appliance Repair | 0 Comments

    by AppDoc | February 10, 2022 | Appliance Repair | 0 Comments

    by AppDoc | February 7, 2022 | Appliance Repair | 0 Comments

    by Adam Cross | February 3, 2022 | Appliance Repair | 0 Comments

    by Adam Cross | January 29, 2022 | Appliance Repair | 0 Comments

    by Adam Cross | January 26, 2022 | Appliance Repair | 0 Comments

    by Adam Cross | January 17, 2022 | Appliance Repair | 0 Comments

    by Adam Cross | January 11, 2022 | Appliance Repair | 0 Comments

    by Adam Cross | January 2, 2022 | Appliance Repair | 0 Comments

    by Adam Cross | December 21, 2021 | Appliance Repair | 0 Comments

    Online Dictionary

    Readable Experience

    Appliance Doctor Of West MichiganAccessibility Statement

    Also Check: Bosch Silence Plus 44 Dba Dishwasher

    Faulty Drain Pump Impeller

    This is one of the most common repairs for a GE dishwasher that doesnt drain.

    The drain impeller pushes water through the drain hose and into the drain line or garbage disposal.

    When this part goes bad, the whole drain pump need to be replaced. Heres how to replace it:

  • Turn off and disconnect the water supply, as well as the power supply.
  • Unattach the mounting brackets so you can pull the dishwasher out from under the counter to access the bottom.
  • Lay the unit on its back
  • Remove the wiring harnesses from the drain solenoid and the other from the motor
  • Loosen the clamp that goes to the sump, and also the outlet for the pump to the center spray nozzle
  • Remove the clamp on the drain return line. Be sure to keep a container or towel near, as there will probably be water in this hose.
  • Remove the support clamp for the motor
  • Tilt the motor towards you and disengage it from the bottom of the tub to pull it out
  • Move the pump and motor assembly to a suitable work area
  • Remove the cutter blade and discard hold the motor shaft while doing so
  • Remove the grater and discard
  • Remove the wear ring retainer and wear ring, discard
  • Remove the impeller. Hold the motor shaft while doing so
  • Remove the pump from the motor. Slide the pump off the motor shaft, set aside
  • Remove the seal from the pump, discard the old seal
  • Clean out any debris and begin reassembling the parts
  • Need This Part? Click Here

    Additional Ui Design And Readability Adjustments

  • Font adjustments users, can increase and decrease its size, change its family , adjust the spacing, alignment, line height, and more.
  • Color adjustments users can select various color contrast profiles such as light, dark, inverted, and monochrome. Additionally, users can swap color schemes of titles, texts, and backgrounds, with over 7 different coloring options.
  • Animations epileptic users can stop all running animations with the click of a button. Animations controlled by the interface include videos, GIFs, and CSS flashing transitions.
  • Content highlighting users can choose to emphasize important elements such as links and titles. They can also choose to highlight focused or hovered elements only.
  • Audio muting users with hearing devices may experience headaches or other issues due to automatic audio playing. This option lets users mute the entire website instantly.
  • Cognitive disorders we utilize a search engine that is linked to Wikipedia and Wiktionary, allowing people with cognitive disorders to decipher meanings of phrases, initials, slang, and others.
  • Additional functions we provide users the option to change cursor color and size, use a printing mode, enable a virtual keyboard, and many other functions.
  • You May Like: Seventh Generation Powder Dishwasher Detergent

    Why Ge Dishwasher Will Not Drain

    One of the reasons why a GE dishwasher will not drain water could be due to a blown thermal fuse . The dishwasher wont start if the thermal fuse has failed and power is cut out at the control board and so draining is entirely not possible.

    The touchpad is the button used to select the cycles, once the touchpad connection is bad dishwasher wont drain due to bad communication with the control board. Check your main control board and be sure its working and still sends power to the dishwasher.

    There are about a dozen reasons why your GE dishwasher will not drain, so to solve that, you need to know the exact problem you are having at hand. Get a troubleshooting manual guide for your dishwasher model, read carefully and understand how your dishwasher model work.

    What Customers Are Saying:

    GE Triton® XL Built

    Thank you for the expeditious answer. It’s good to know you’re out there and awake in the wee hours when I finally have time to ask questions about my Jenn Air.

    JeanRiverhead, NY

    You did one super job of explaining to me everything there is to know about this fridge. I’m looking forward to asking you questions in the future.

    JimmyBagley, IA

    Wonderful service, prompt, efficient, and accurate. Couldn’t have asked for more. I cannot thank you enough for your help.

    Mary C.Freshfield, Liverpool, UK

    This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

    AlexLos Angeles, CA

    Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

    GPHesperia, CA

    I couldn’t be more satisfied! This is the site I will always come to when I need a second opinion.

    JustinKernersville, NC

    Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

    EstherWoodstock, NY

    Don’t Miss: Kitchenaid Dishwasher Upper Rack Clips

    RELATED ARTICLES

    Most Popular