Disability Profiles Supported In Our Website
- Epilepsy Safe Mode: this profile enables people with epilepsy to use the website safely by eliminating the risk of seizures that result from flashing or blinking animations and risky color combinations.
- Visually Impaired Mode: this mode adjusts the website for the convenience of users with visual impairments such as Degrading Eyesight, Tunnel Vision, Cataract, Glaucoma, and others.
- Cognitive Disability Mode: this mode provides different assistive options to help users with cognitive impairments such as Dyslexia, Autism, CVA, and others, to focus on the essential elements of the website more easily.
- ADHD Friendly Mode: this mode helps users with ADHD and Neurodevelopmental disorders to read, browse, and focus on the main website elements more easily while significantly reducing distractions.
- Blindness Mode: this mode configures the website to be compatible with screen-readers such as JAWS, NVDA, VoiceOver, and TalkBack. A screen-reader is software for blind users that is installed on a computer and smartphone, and websites must be compatible with it.
- Keyboard Navigation Profile : this profile enables motor-impaired persons to operate the website using the keyboard Tab, Shift+Tab, and the Enter keys. Users can also use shortcuts such as M , H , F , B , and G to jump to specific elements.
Ge Dishwasher Wont Clean Dishes
Like many problems that a dishwasher can have, not cleaning your dishes the one thing it was designed to do, can have many factors that are causing this issue. Here are several of the most common reasons why a dishwasher might stop cleaning dishes:
Dirty interior: Over time, a dishwashers interior will become dirty from food, grease, and soap scum. Many people think that dishwashers clean themselves when you use them, but this isnt the case. Appliances, even ones designed to clean, will almost always need good cleaning themselves. You can clean a slightly dirty dishwasher by running a cycle with 3 cups of white vinegar poured in the bottom.
Dirty filter: If your dishwasher has a removable filter, it might need a cleaning. In these dishwashers, it is easily accessible below the racks covered by a twist-off cap. Remove the filter and rinse it thoroughly with hot running water. If it is particularly dirty, soak it in hot soapy water.
Broken soap dispenser: The major component that cleans your dishes is soap. If your soap dispenser isnt distributing soap, or at the right time, or not enough of it, your dishes wont come out clean. Typically the issue is due to a jammed spring in the dispenser door, which you can clean using a small brush dipped in hot water and vinegar. If the dispenser door or the spring is broken, it will need to be replaced.
Check The Chopper Blade For Clogs
The chopper blade in the dishwasher dices any food particles that come off the dishes. This helps to avoid a clogged sink or dishwasher line. If too much debris builds up around the chopper screen, the dishwasher can stop draining.
Therefore, if your dishwasher isnt draining, determine if the chopper blade has damage and then clean the debris from the area. If you discover a damaged blade, you will need to replace it.
To replace the chopper blade, follow the steps below:
Read Also: Bosch 800 Series Dishwasher In Stock
Most Common Problems With Ge Dishwashers
As with any type of dishwasher or appliance for that matter your dishwasher can experience a variety of problems, particularly related to the flow and drainage of water in the appliance. Some common complaints with GE dishwashers include:
- The dishwasher isnt draining.
- The detergent cup fails to work.
- The dishwasher isnt filling with water as expected.
- The dishwasher door is leaking.
- The dishwasher emits a bad smell.
If any of these problems sound familiar, heres what you can do about the issue.
Ge Dishwasher Not Draining All The Way

If your GE dishwasher is not draining all the way, you can check a few things to see if the issue is with the dishwasher itself or the drain system.
First, you can check to see if something obstructs the dishwashers drainage. This could be a clog in the dishwashers drain pipes or a blockage in the dishwashers filter. If there is a blockage, you must remove the obstruction and clean the dishwashers drainage system.
In most cases, the dishwasher will need to be replaced if the problem cannot be resolved. However, if your dishwasher might be defective, please contact GE customer service for more help.
Also Check: Parts For Ge Nautilus Dishwasher
Obstruction In Water Intake Valve:
This is very common and can be caused by many things such as hair, soap scum, food particles, etc.
To clear the obstruction:
- Remove the detergent trap and check it for debris. Clean or replace if necessary.
- Make sure the sump pump is working properly and that the water intake valve on the bottom of the dishwasher is opening and closing properly.
- In addition, make sure that there arent any objects that are getting sucked into the dishwasher that are blocking these openings. This can cause damage to your dishwasher and even a fire hazard!
Ge Dishwasher Not Filling With Water
A common reason for a GE dishwasher not filling is the flood float has become stuck. The flood float will typically stop the dishwasher from adding water if there is already too much water in the appliance.
The flood float might become stuck if you run the dishwasher with a clogged disposer. The stuck flood float tells the dishwasher not to add more water, even though theres no water in the appliance. If this happens, youll need to remove the lower rack and tap on the flood float to get it moving again. Once the flood float is unstuck, it should work normally.
Don’t Miss: How Much Does Dishwasher Installation Cost
Remove Pump And Motor Assembly Parts
Move the pump and motor assembly to a stable work area. While holding the motor shaft, remove the cutter blade, grater, wear ring and retainer, and discard. While continuing to hold the motor shaft, remove the impeller and then remove the motors pump.
The pump should slide off the motor shaft, then you can set it aside.
Cause # : Blocked Filter
The second most commonly reported reason is the blocked filter. Food particles clog the filter that can block the drainage system.
Solution: Clean the water filter periodically to ensure that it stays in mint condition. Some GE dishwashers come with ultra-fine and fine filters.
Follow the steps below to clean the water filter in your GE dishwasher.
To clean the ultra-fine filter
- Remove the bottom rack to access the water filter.
- Twist the ultra-fine filter counterclockwise and lift to remove it.
- Rinse the filter with warm soapy water and use a sponge to carefully remove any stuck food particles. Dont scrub with scouring pads and toothbrushes, as it can damage the ultra-fine filter.
- To remove any stains or smells, you can also dip the filter in white vinegar for 10-20 minutes.
- Insert the filter back in its place and twist it clockwise to lock it in its place.
- Make sure you check the arrow on the fine filter. It must be used as a guide to align the placement of an ultra-fine filter. It is a great idea to take a picture before removing the ultra-fine filter.
To clean the fine filter
Please note that 1-2 cups of water covering the bottom of the tub is normal on models without an ultra-fine filter in GE dishwashers. In models with an ultra-fine filter, water in the sump is normal, but the water should not cover the bottom of the tub.
Recommended Reading: Why The Dishwasher Doesn’t Drain
Improperly Installed Garbage Disposal
Garbage disposals are installed with a plug in the drain tube. If the dishwasher doesnt connect to the garbage disposal, the plug must remain in the drain tube. However, if the dishwasher connects to the disposal, you should remove the plug.
If you installed the garbage disposal recently, you might not have removed the drain plug.
Check The Door Latch Assembly
A GE dishwasher will not start if the door isnt closed properly because it will not receive the power to finish a wash cycle. The door latch assembly holds the door closed and also houses the door latch switch, which is what provides power to the dishwashers buttons.
If your dishwasher isnt starting due to this issue, either the door latch isnt securing the door shut, or the latch switch isnt on or providing power to the controls. If you want to check to see if the door latch switch is the issue, you can use a multimeter like this AstroAI Digital Multimeter to check for continuity after powering the dishwasher off. To check for continuity:
Step 1. Unplug the dishwasher from the power source.
Step 2. Remove the inner door panel for access to the latch assembly, usually located at the top.
Step 3. Insert the catch into the door assembly to check if the catch activates the door latch switches.
Step 4. The switches should be activated manually and remove them to check for continuity.
Step 5. On Rx1, touch the probes to the switchs terminals with the multimeter.
Step 6. If the reading is either zero or close to zero, the issue is with the door latch switch. If it is higher, the door latch assembly needs to be replaced.
You May Like: Bosch 500 Vs 800 Dishwasher
Check The Drain For Clogs
The first place to look in your dishwasher is for a clogged drainpipe. In some homes, the dishwasher drain connects with the garbage disposals drain tube under the kitchen sink, and this drain hose can become clogged. If thats the situation youre in, detach the drain hose and clear it out to see if that helps the water flow more easily.
As a note, if you notice any draining problems immediately after installing the dishwasher, it might be that the knockout drain plug on the garbage disposal wasnt removed as expected. You will need to fix this to allow the water to drain.
To prevent draining issues, its also a good idea to look for food debris that could be around the drain line. If you see any bits of food, clear them out and see if that helps with the standing water.
Cause # : Dirty Dishwasher

Sometimes everything will be working perfectly alright, but your dishwasher may not still drain properlythe reason: a dirty dishwasher.
Solution: Cleaning your dishwasher monthly with vinegar and baking soda is best to ensure that it performs optimally. Follow the steps below for cleaning your GE dishwasher with vinegar and baking soda.
- Empty your dishwasher and place 1-2 cups of white distilled vinegar at the top rack. Run your dishwasher on hot settings.
- Once the cycle is complete, remove the cup holding vinegar and sprinkle one cup of baking soda at the bottom of your dishwasher.
- Program your dishwasher to a hot cycle.
- Now use a flexible wire to clean the showerheads on spray arms.
- Do not add vinegar and baking soda together in your dishwasher.
Don’t Miss: Dishwashers On Sale Stainless Steel
Check The Dishwasher Filter
Certain models of GE dishwashers have a removable filter. If your model has such a filter, check that it hasnt become clogged with debris.
To check the dishwasher filter, disconnect your dishwasher from its power source and then remove the filter. If you have a filter, it will be near the bottom of the appliance. Once you have the filter out, give it a good wash with soapy water, removing anything stuck on the filter.
While you look around the bottom of the dishwasher, also check the entire sump, or bottom area, to make sure theres no remaining debris or food particles that could make it harder for the appliance to drain.
Cause # : Excessive Detergent
Adding excessive detergent or using the wrong detergent in your dishwasher can cause drainage problems in GE dishwashers.
Solution: You need to take care of three things to solve detergent-related drainage problems.
Don’t Miss: Bosch 800 Dishwasher Crystal Dry
Ge Dishwasher Not Draining: 8 Causes And Their Solutions
Appliance repair guy from Washington. I am majorly experienced in dishwashers, water filters and refrigerators, AMA on my twitter account.
Home»Home & Garden»Kitchen & Dining»Kitchen Appliances»Dishwashers»GE Dishwasher not Draining: 8 Causes and their Solutions
GE is a common household name across the US. The brand offers a complete range of kitchen and home use appliances. Its dishwasher is one of the most frequently bought machines because of its superb cleaning power, reliability, and durability.
Just like all the other dishwashers, GE dishwashers also need maintenance and troubleshooting. One of the most commonly cited problems by GE dishwasher users is GE dishwasher not draining. While it is irritating to open the door of your dishwasher and find a water pool at the bottom, the good news is users can deal with the majority of the complaints by checking a few things and making some quick fixes.
We will help you sort the GE dishwasher not draining problem in this article. Please note that this guide cannot be used as an alternate to your products troubleshooting manual. It will cover the generic steps that will work with dishwashers from other brands as well.
# : Dishwashers Pump Not Working Effectively
If you have put too many dishes in your GE Profile dishwasher, its pump might stop working. Another reason could be forceful vibration caused by harder items such as dishes with metal handles.
In order to fix this issue, you need to see if your dishwasher agitator is damaged or broken down, or if it cant rotate properly.
If it is broken down, then you need to replace it immediately.
Read Also: Frigidaire Gallery Dishwasher How To Start
Check The Drain Impeller:
The drain impeller is responsible for forcing the suds down into the drain tube.
If there is damage, then the suds wont drain properly and will collect in the bottom of the tub.
To check it:
- Remove the bottom panel of the dishwasher .
- Then take a check at the bottom of the tub where the drain tube comes out.
- If there is a lot of gunk there, then you need to replace the drain impeller.
Ge Dishwasher Steam Vent Problems
If your dishwasher has a problem with the steam vent. The following steps will help you troubleshoot and fix the issue.
- You must first rotate the cover counterclockwise, found on the inside of the panel, to remove the defective vent.
- Take it off the door by lifting it.
- Pull the vent off the inner door panel once the cover is no longer attached.
- Replace it with a new one.
Recommended Reading: Whirlpool Dishwasher Heating Element Replacement
The Air Gap Is Clogged
An air gap prevents water from sink drain clogs from backing up into the dishwasher. However, the air gap itself can become clogged with debris over time and requires regular cleaning. If your home has an air gap, clogs can be why the dishwasher doesnt drain properly.
Heres how to clear air gap clogs:
Drain Pipe And Garbage Disposal

Before checking the dishwasher components that could be responsible for the drainage problem, check that the pipe the dishwasher drains into is not clogged. If the dishwasher is connected to a garbage disposal, make sure the disposal is clear of debris. Note that the garbage disposals drain tube that connects to the dishwasher drain hose can become clogged. Detaching the drain hose and clearing the disposals drain tube may fix the drainage issue. If the dishwasher has been recently installed, make sure the garbage disposal knockout plug in the garbage disposals drain tube has been removed.
You May Like: Kitchenaid 39 Dba Dishwasher With Third Level Utensil Rack White
Turn Off The Power Supply And Water Supply
Turn off the power supply by unplugging it from the outlet or shutting down the circuit breaker to which it’s connected.
Then, turn off the water supply by looking for the water line connecting to the dishwasher. This is a copper or stainless steel line that should be just right under the sink.
You also need to close the shut-off valve under the sink that supplies water to the dishwasher.
Ge Dishwasher Water Leaks
If you have a GE dishwasher, then you should check for leaks. A leaky faucet or pipe usually causes it.
It can cause staining on dishes, floors, walls, etc. So, you must find where the leak is coming from and fix it.
You can use the following methods to locate the source of the leak:
1. Disconnect the unit from the outlet.
2. Take the access panel off the unit.
3. Remove the three Phillips screws securing the access panel.
4. Pull away the access panel.
5. Make sure that all seams and joints are free of water stains or discoloration. See if you can get water if you poke an awl or a screwdriver into the seam or joint. Then, blot up the water using a paper towel or a rag.
6. Make sure the unit or its components have no dry spots. If there are any, add more liquid soap or baking soda to the rinse aid dispenser.
7. The drain pump and motor need to be checked if you still have water spots after performing the above steps. These are the two most likely places where a leak can occur.
8. Check for pinhole leaks where the drain line enters the unit.
9. Also, ensure the drain hose is not leaking anywhere between where it leaves the dishwasher and where it enters your plumbing system.
10. If you notice a leak, use a piece of rag or paper towel to blot up the water. Use caution not to over-tighten, or you may cause the leaky part to come off.
Recommended Reading: Best Dishwasher That Dries Dishes