Sunday, February 18, 2024
HomeFactsGe Dishwasher User Interface Board

Ge Dishwasher User Interface Board

Licensed Dishwasher Repair Service

GE Dishwasher Repair – Replacing the User Interface Control Board

Get a professional dishwasher repair technician from The A Team Appliance Repair to diagnose the problem with your dishwasher. With our in-home, same-day dishwasher repair service, you can expect to have the problem repaired quickly, avoiding or minimizing damage to your household. Our professional, licensed technicians arrive with everything they need to diagnose and remedy the problem at hand.

  • Water is not filling the dishwasher
  • The water is not draining correctly
  • The detergent is failing to release
  • Dishes come out dirty
  • Dishes are wet at the end of the cycle
  • The dishwasher is making unusual noises
  • The cycle will not start

Types of Dishwashers We Repair

Our professional technicians are licensed to repair all types of imported and domestic dishwashers, including

  • Built in Dishwashers

Quality & Reliable Service at Reasonable Price


We know your time is valuable, whether its a rental property , your own property, or your business, we will be there in no time, in order for your to go back to your daily business, with as little disruption as possible.


Just because our technicians work fast, does not mean that it isnt done right. Our technicians are highly experienced and use brand new, original, and high quality parts needed to complete the repair of your appliance.


Book Your Repair

Ge Wd21x23462 Dishwasher User Interface Board

  • Part Number: GE WD21X23462
  • Replaces Parts: WD21X22237 4587221 PS12342776 WD21X22804 WD21X26179 WD21X22236 AP6279241 WD21X22366 WD21X22955 EAP12342776 WD21X26178 WD21X22175 WD21X23702 WD21X23709 WD21X22956
  • Fits Brands: GE, General Electric
  • Type: Dishwasher Replacement Parts, Dishwasher Top User Interface Control Board
  • Item Price: View more item descriptions and Get the Best Price Below.

Ge Dishwasher Just Replaced Ui Board Now The Buttons Don’t

Ge dishwasher. Just replaced ui board. Now the buttons don’t cycle. Gdf520pgj2bb. Holding start and select cycle dont slow me to enter into and other modes

Contractor’s Assistant: Are there any error codes or blinking lights on your GE dishwasher? How old is it?

No lights. 3 or 4 years

Contractor’s Assistant: How long has this been going on with your GE dishwasher? What have you tried so far?

Main board and putting in a new ui board

Contractor’s Assistant: Is there anything else the Appliance Expert should know before I connect you? Rest assured that they’ll be able to help you.

All voltage is correct

Hello and welcome to JustAnswer!

This is Mark, I’m an appliance repair technician with 20 years of experience, and I’ll be assisting you today.You will see phone call pop ups… know that I do not send those – the site does that, and if you do not want a $24 call, you can ignore those

Sorry to hear your dishwasher panel is not working – that is frustrating indeed

Look on the display and panel – see if you see a CONTROL LOCK light lit up… If you do – press and HOLD the control lock button down for 3 to 5 seconds to unlock panel

Ok… when you say the buttons don’t cycle – do you mean you are not seeing any lights on panel or just that they are not working when you press them?

So – what happens when you press a button?

Do any buttons work when you try to select options?

What was the reason that you replaced that user interface board initially?


Recommended Reading: Kitchenaid Top Control Dishwasher With Freeflex Third Level Rack

How To Replace A Dishwasher User Interface Control

This repair guide gives step-by-step instructions for replacing a dishwasher user interface control. The user interface control houses the selection buttons and display information such as the remaining cycle time. A defective user interface control won’t light up or won’t respond when you press its buttons. Its difficult to pinpoint the user interface control as the source of a problem. Refer to the tech sheet for diagnostic tests or have a local dishwasher repair expert test the control. If the user interface control is faulty, replace it with a manufacturer-approved replacement part.

This procedure works for Kenmore, Whirlpool, Maytag, KitchenAid, Amana and JennAir dishwashers. You also can use the same basic steps to replace the user interface control in some Frigidaire, Electrolux, GE, Samsung and LG dishwashers.

How to replace a dishwasher user interface video.


Most Popular