Friday, September 29, 2023
HomeNewsControl Board For Whirlpool Dishwasher

Control Board For Whirlpool Dishwasher

Whirlpool 8564543 / Wp8564543 Dishwasher Electronic Control Board

Whirlpool Dishwasher Control Board Replacement W10906426

1 Year Warranty

1 Year Warranty

Whirlpool 8564543 / WP8564543 Dishwasher Electronic Control Board

Additional Information

This manufacturer-approved electronic control board is for dishwashers.

Electronic control board 8564543 / WP8564543 manages the functions of the dishwasher, such as washing, draining and drying.

Unplug the dishwasher before installing this part.

Whirlpool Dishwasher Control Board Wpw10084141

  • Part No: WPW10084141
  • Replacement Parts: 8562997R 8575276R W10084141 8559824 W10039770 W10076350 PS11748220 AP6014950 8562996R 8559825 8562997 EAP11748220 8562996 8575276 W10076360 8575277R 1373167 8575277 W10084141R W10039760
  • Fits Brands: Whirlpool, KitchenAid, Kenmore, Estate, Inglis, Roper
  • Price:Check Price Here

Testing For Whirlpool Dishwasher Control Board Problems

Now, while understanding the signs that point to a faulty control board can be helpful, the best way to be sure is to test your dishwasherâs electronic control board.

Before that, you should understand that the most common reason for misdiagnosing control board failure is bad connections.

That being so, first try to disconnect, inspect, and then reconnect the wires going to various slots on the control board.

To be clear, be sure to check all connections â you will be looking for broken/loose wires, wires not pressed far enough into connectors, pinched wires, and more.

You may be surprised that the unit works after reconnecting everything correctly and securely.

If that has not helped, it makes perfect sense to proceed with the testing.

Now, what you need to know is that perhaps the easiest way of testing is by first eliminating the possibility of the keypad being the culprit.

Reason?

The symptoms of a bad touchpad and a troubled control board are, to some extent, very similar.

So you will be testing the part by running a test on the keypad operation.

Read Also: Fisher And Paykel Drawer Dishwasher

Whirlpool Dishwasher Parts 40 Electronic Main Control Boards

Any problem with your dishwasher? Fix it yourself and save money today. Find the right part and compare the best price here! Whirlpool Dishwasher Parts Electronic Circuit Main Control Board Replacement Parts Fast Shipping, Shop Now!

The electronic main control board manages the functions of the dishwasher such as washing, draining, and drying. If your dishwasher doesnt work properly, such as showing some error on the display panel, the dishwasher buttons dont work, the dishwasher wont start, wont turn-off, or the dispenser wont work, then replacing the electronic main control board could solve the problem.

Please check your appliance model number by using Ctrl+F keys, find the correct replacement part, read more product descriptions, item condition, shipping information, returns & refund policy, payment options, learn how to replace the control board, and compare the lowest price by clicking the Check Price Here below.

Note: Apartso will receive a small commission if you make a purchase through our referral link at no extra cost to you. Thank you very much! See Affiliate Disclosure for details.

How To Reset The Dishwasher:

6

Much like a computer, resetting the dishwasher control can sometimes solve the issues you are experiencing. To reset the dishwasher control panel, it needs to be disconnected from the power source for one minute. If your dishwasher is plugged into an outlet, simply unplug the unit for one minute and then plug the unit back in. If the dishwasher is hard wired to the power supply, turn the breaker off at the home electrical panel that powers the dishwasher for one minute and then turn the breaker back on.

Don’t Miss: Bosch Dishwasher E 15 Code

Whirlpool Dishwasher Control Board Wp8564543

  • Part No: WP8564543
  • Replacement Parts: B008DK6W60 8269187R B008DK3HJ0 B007V9K27O B007V9K2OM WP8564543 B008DK7J0I 8534866 8528171R 8528172R B008DK72WS B01N965PIJ B007V9K882 B008DK3GLO 8527685R 8528171 8564542R B008DK3H4K B008DK7IBI B008DK3HXQ B007V9K1CA 8534866R 8530909 B007V9K8MI AP6013336 B008DK73F4 8564543 8564542 B00DZUACIW B008DK590U 8528874R B008DK7GC4 8528874 8269187 PS11746562 B008DK733G B008DK7GII B008DK599Q 8530909R 8564542EXCR B007V9K1K2 8534867 8534867R B007V9K13E B001DPQX9I B00VYJF8S0 B008DK6VYI B008DK7390 B008DK4AOG 8528172 8534963 B008BU0PCY 8527685 8539379 B00MJ2R3LQ
  • Fits Brands: Whirlpool, Kenmore, Estate, Roper, KitchenAid, Inglis
  • Price:Check Price Here

How To Reset A Whirlpool Dishwasher Control Board

Whirlpool dishwashers are increasingly being used over time, seeing how convenient they are in our lives. However, like any electrical appliance, whirlpool dishwashers rely on electronics to control the various cycles to clean dishes. As long as you use your dishwasher in a more sophisticated way, you can expect better yet long service. Sudden power surges or electrical outages can cause the dishwasher to stop working. In cases like these, resetting the dishwasher control board is necessary. The procedure is a straightforward one, and this article will cover all the main points of resetting a whirlpool dishwasher control board.

Don’t Miss: Whirlpool Dishwasher Buttons Not Working

How To Replace The Whirlpool Dishwash Control Board

Watch these videos, created by leading home appliance part services companies: AppliancePartsPro, RepairClinic, and PartSelect. The videos shows simpe and easy step-by-stop on how to replace the electronic main control board on Whirlpool dishwasher. This guide can also be used with the similar parts. You also can search more other suitable videos on .

Tools Required:

Whirlpool Dishwasher Not Starting Or Not Operating

Whirlpool Dishwasher Repair How to replace the Control Board

There are several reasons why your Whirlpool dishwasher not starting or not operating:

  • control lock is on
  • dishwasher is in sleep mode
  • delayed wash option is selected
  • door is not completely closed and latched
  • water supply is not turned on
  • the power needs to be cycled to reset the dishwasher

Is the control lock “on” or is the dishwasher in sleep mode?

The control lock is used to avoid unintended use of the dishwasher as well as to avoid unintended cycle or option changes during a cycle, some model have a sleep mode function. The control lock light will stay on for a short time, indicating that it is activated and all buttons are disabled. If any buttons are pressed while the dishwasher control is locked, the light will flash three times. The door can still be opened/closed while the controls are locked.

NOTE: You may need to disable Sleep Mode by pressing either START/RESUME or CANCEL, or by opening and closing the door before you are able to turn the control lock off.

To turn off the control lock feature:

  • Press and hold the Lock Button for four seconds, the lock light will turn off.
  • for more information on the Control Lock

    Don’t Miss: Dishwasher Vs Hand Washing Water Use

    Testing The Keypad Operation Procedure

  • Unplug the dishwasher or simply disconnect power.
  • Open the door to the dishwasher.
  • Open the console then proceed to disconnect the keypadâs ribbon connection from your control .
  • Double check that all the other connections are correctly made.
  • Re-assemble the console but the door to the dishwasher should not be closed.
  • Plug in the dishwasher or just reconnect power.
  • Wait about 5 seconds.
  • Close the dishwasher door.
  • Observe the controlâs response
  • Now, if the control is fine, it will stop seeing shorts once the keypad is unplugged and it will turn on the drain motor .

    That is the clearest sign that the problem is the keypad so you will probably need to change out the keypad to solve whatever issue you have been experiencing.

    On the converse, if it is still detecting shorts even when the keypad is unplugged , then it is likely that control board is dead and it could be time to replace it.

    To add, the most common reason for replacing the board is if the dishwasher wonât work at all.

    Whirlpool Dishwasher Control Board Replacement

    To replace the electronic control board , follow the following steps:

  • Turn off power to the dishwasher .
  • Remove the screws securing the control panel.
  • Pull the panel off.
  • Depress the tabs hold the control board cover to release it.
  • Use a flathead screwdriver to release the tab through the bottom of the panel.
  • Again use the small flathead screwdriver to pry up the tabs to free the thermal fuse.
  • Detach the ribbon connector to depress the tabs to release the old control board.
  • Next, install the new control board.
  • Start by inserting the tabs in the slots in the control panel and snapping it into position.
  • You then snap the ribbon connector into place on your new board.
  • Proceed to transfer the wires from the old board to your new board.
  • Next, snap the thermal fuse into place on the new board.
  • Replace the control board cover.
  • Position the control panel correctly and secure it once more with the screws.
  • Restore power to the dishwasher and see if it will start operating again properly once again.
  • Please watch the Video below for the step by step instructions..

    Recommended Reading: Pots And Pans Dishwasher Safe

    Signs Of Whirlpool Dishwasher Control Board Problems

    Here are some of the signs of Whirlpool dishwasher control board problems:

    • Cycles not starting when you press the start button or the dishwasher only accepting to run on some cycles .
    • Error codes or flashing lights on your dishwasher.
    • The dishwasher failing to run completely.

    In other words, your dishwasher is just very erratic .

    Whirlpool Dishwasher Control Board Price

    W10595568 WHIRLPOOL Dishwasher electronic control board

    Forget performing a successful whirlpool dishwasher control board repair -the surest way to eliminate Whirlpool dishwasher control board problems is replacing the part.

    So, how much will it cost you?

    Now, in general, the average price of a Whirlpool Dishwasher control board is $120 to $150, depending on where you buy.

    Needless to say, that makes more economic sense than spending over $600 on a new dishwasher.

    If ordering from , be sure to reach out to the seller to find out if it is the correct part for your specific Whirlpool dishwasher model before ordering.

    Recommended Reading: Are Ember Mugs Dishwasher Safe

    Whirlpool Dishwasher Circuit Board & Timer Parts

    Order now and this item will ship out tomorrow

    Electronic control board

    Order now and this item will ship out tomorrow

    Electronic control board

    Order now and this item will ship out tomorrow

    Order now and this item will ship out tomorrow

    Electronic Control

    Order now and this item will ship out tomorrow

    Electronic Control Board

    Order now and this item will ship out tomorrow

    Electronic control board. NOTE: This part is often misdiagnosed. If dishwasher will not turn on check the thermal fuse mounted on the control board. You can enter your appliance model# in the repair help section of our website for additional repair help.

    OEM Part – Manufacturer #WPW10285180

    Whirlpool Dishwasher Control Board Reset

    Now, sometimes your control panel board will stop acting up after performing a simple reset.

    In fact, a reset should be the first thing that should come to your mind if the control board started malfunctioning after a sudden power interruption or power surge.

    So, how do you reset a Whirlpool dishwasher control board?

    Follow the steps below:

  • Press Off button on your Whirlpool dishwasher.
  • Unplug the power cord going to the dishwasher from the wall outlet.
  • Wait 10 to 15 minutes.
  • Restore power to the dishwasher .
  • Now press High from the dishwasher control panel. The buttons set to be pressed will vary from one Whirlpool dishwasher to the next but it is, in general, the highest available setting you can select for a washing cycle.
  • Next, choose one of the provided Heat cycles for dishes drying on your dishwasher.
  • Select the two cycles once more- press High then one of the available Heat cycles .
  • Viola!

    This resets the whirlpool dishwasher control board programming and it could make the dishwasher control board operational again.

    ALSO READ:

    You May Like: Does The Dishwasher Save Water

    Whirlpool Dishwasher Control Board 8564543

    • Product: 8534866 8564543 Whirlpool Dishwasher Control Board free shipping
    • Part Number: 8564543
    • Replacement Parts: WP8564543, 8564543, AP6013336, 8269187, 8269187R, 8527685, 8527685R, 8528171, 8528171R, 8528172, 8528172R, 8528874, 8528874R, 8530909, 8530909R, 8534866, 8534866R, 8534867, 8534867R, 8534963, 8539379, 8564542, 8564542EXCR, 8564542R, PS11746562, B008BU0PCY, B008DK3GLO, B01N965PIJ, B008DK6VYI, B007V9K8MI, B008DK3HJ0, B007V9K882, B007V9K1CA, B008DK72WS, B007V9K13E, B001DPQX9I, B008DK73F4, B00MJ2R3LQ, B008DK733G, B00DZUACIW, B008DK6W60, B008DK599Q, B008DK7GC4, B008DK590U, B007V9K1K2, B008DK3H4K, B008DK7GII, B007V9K2OM, B008DK7390, B008DK7J0I, B00VYJF8S0, B008DK4AOG, B007V9K27O, B008DK3HXQ, B008DK7IBI
    • Compatible Brands: Whirlpool, Estate, KitchenAid, Roper, Inglis, Kenmore
    • Product Type: Dishwasher Replacement Parts, Electronic Circuit Main Control Board Assembly Parts
    • Item Location: Holland, Michigan, United States
    • Ship To: United States

    Other Home Appliance Information

    Whirlpool Dishwasher Control Panel Replacement WPW10733627

    In the stores online, there are many sellers selling a variety of appliance replacement parts, for instance, Thermador Range Control Board Replacement, Maytag Neptune Washer Control Board Replacement, How to Change A Oven Fan Motor, Kenmore Gas Range Control Panel Problem, Whirlpool Double Oven Control Board, also covering the Whirlpool Dishwasher Control Board 8564543.

    For more popular home appliance brands, such as Crosley, you can view its products, and services on the store online.

    Recommended Reading: Ge Dishwasher Serial Number Lookup

    Has A Delay Wash Option Been Selected

    A delay wash option runs the dishwasher at a later time or during off-peak electrical hours. If the delay wash has been selected, the dishwasher will not run until the delay time is reached.

    To Turn Off the Delay Wash Feature:

  • Press CANCEL/DRAIN to cancel the delay.
  • Press START/RESUME to start the cycle.
  • RELATED ARTICLES

    Most Popular