Tuesday, December 5, 2023
HomeFactsBosch Dishwasher Inlet Valve Replacement

Bosch Dishwasher Inlet Valve Replacement

Bosch Dishwasher Water Inlet Valve Replacement In Pitt Meadows

Bosch Dishwasher Won’t Fill? Replace Water Inlet Valve #622058

Our client in Pitt Meadows was experiencing issues with their Bosch dishwasher, which would continually leak water between washes. After they reached out to us, we were able to schedule an appointment for their repair within 3 hours.

Upon arrival, we inspected the unit thoroughly to see if there was any cosmetic damage that was causing the leakage. Typically, a worn-out door gasket can cause water to leak through the machine. After running a test cycle we confirmed that the door gasket was not the issue. We inspected the water inlet valve and verified that the issue was coming from this faulty component. We ordered a new water inlet valve for this model and had it delivered to our clients home within a week. Once we replaced the faulty water inlet valve with the new one, we ran a test cycle to confirm that the unit was working effectively.

If you are experiencing a similar issue with your dishwasher, give us a call so we can help.

Duration: 30 minutes

Replacement Parts For Frigidaire Dishwasher

Part Number 297286803

This run capacitor is 120 volts 15 mfd, the capacitor is located on the refrigerator compressor. This part is used to help the compressor to kick on and off keeping the refrigerator and freezer compartments at an ideal temperature. If the run capacitor has failed, you might notice that the refrigerator is warm, freezer is warm, fridge is noisy or the compressor wont start. remember to unplug your appliance before making this repair. Please use your model number to insure that these are the correct replacement parts for your specific model.

Also Check: Water Parks In Orlando Florida

Samsung Linear Wash Stainless Steel

Best Affordable Quiet Dishwasher

Whisper-quiet operation is a common factor to forgo when you choose an inexpensive dishwasher. But for many families, especially in homes where the bedrooms are near the kitchen, its important to have a quiet dishwasher.

The Samsung Linear Wash operates at 42 decibels, so its very quiet. You definitely wont be able to notice it from another room.

This dishwasher has a first-of-its-kind WaterWall feature. The sliding spray bar moves back and forth to give deep and even cleaning results during the cycle.

We also love that this dishwasher has an AutoRelease door which opens automatically to aid the drying cycle.

And dont forget about the Zone Booster function which targets areas of the dishwasher with custom settings. So if you have delicate glasses or heavily soiled pots, the Zone Booster focuses more on these areas to ensure a deep clean.


Also Check: Kitchenaid Dishwasher Lower Rack Replacement

Works With All Models Listed



Remove The Circulation Pump And Motor Assembly

425458 Bosch Thermador Dishwasher Inlet Water Valve Assembly

Disconnect the wires from the diverter motor and circulation pump motor.

Remove the optical water indicator from the sump and let it hang by the wire harness.

Tilt the dishwasher upright.

Release the sump mounting tabs.

Carefully open the dishwasher door while supporting the base to prevent the dishwasher from tilting forward.

Pull the circulation pump and motor assembly up and out of the dishwasher tub and close the dishwasher door.

You May Like: Cost Of Installed Water Heater

Read Also: Kenmore Quiet Guard Deluxe Dishwasher

Appliances Repair Richmond Hill

Our experience at Appliance Repair Richmond Hill, ON, is not our only tool. We also have expert home appliance repair qualifications and all certifications needed to provide professional services. You can count on us to fix any appliance in your kitchen and laundry room. Our pros are also trained to install new gas and electric appliances. And we are always available to cover your appliance maintenance requests. Richmond Hill is known for the plethora of its parks and recreation centers, the performing arts center, and the David Dunlap Observatory. But its also an important business hub in Ontario. People in Richmond Hill today are too busy to bother with dishwasher and dryer problems. What you all need is fast appliances repair and technicians you can count on. What you also expect is good manners, friendly prices, and quality work. Such expectations match the features of our company. When you work with Richmond Hill Appliance Repair, you are served fast and all your appliances at home are properly fixed.

Dishwasher Float Switch Stuck

Problem: The float switch detects how much water is in your dishwasher. Its attached to a larger float system that rises and falls with the water level in the tub. Once the water reaches a certain level the float switch is activated and signals the water inlet valve to restrict the flow of water.

Solution: If a GE dishwasher flood float location is stuck too low it wont properly detect water levels and may signal the water inlet valve to close prematurely. This will cause a no water in dishwasher issue. A float switch thats stuck may be malfunctioning and will need to be assessed for replacement.

Recommended Reading: How To Clear Dishwasher Drain

Signs Your Ge Dishwasher Isnt Getting Enough Water

A GE dishwasher not filling with water typically presents with two signs:

  • Dirty dishes after a wash cycle
  • No sounds of water in the machine
  • An adequate water level in your dishwasher should reach the heating coil or middle hub, where the spray arm is anchored. We recommend these steps to determine the correct water level in your dishwasher:

  • Begin a wash cycle
  • When you hear the dishwasher stop filling with water, open the door
  • If the water level is below the middle hub by more than half an inch, your dishwasher may not be getting enough water
  • When you have a GE dishwasher not filling with water, there are usually three main causes. Well help you troubleshoot a GE dishwasher low water level issue.

    Recommended Reading: Stainless Steel Dishwashers On Sale

    Guilty As Charged: The Water Inlet Valve

    Bosch dishwasher inlet water valve replacement HOW TO DIY.

    Repair professionals understand that just a few components are responsible for most appliance problems.

    With dishwashers, the water inlet valve is always a prime suspect. When your dishwasher goes rogue, expect to find the inlet valve in the subsequent police lineup.

    Signs pointing to a faulty inlet valve include:

    • Leaks that fill the dishwasher when its off.
    • Inadequate water for a cycle. The dishwasher fills too slowly or not all.
    • A bad inlet valve can lead to leaks from the dishwasher onto the kitchen floor. This is potentially hazardous.
    • Most inlet valve malfunctions stem from a defective seal or solenoid failure.

    Also Check: Bosch Dishwasher Drain Hose Extension

    Also Check: How Long Should Dishwashers Last

    Bosch Dishwasher Door Falls Open

    After the dishes are placed in the dishwasher, closing the door completely is necessary for the machine to work. If the door of the dishwasher cannot be closed completely for safety reasons, the program will not start automatically. Thats why the Bosch dishwasher door wont close problem needs to be taken into account. There are multiple factors that can cause this problem in a dishwasher whose door does not close.

    You May Like:Is There Fluoride In Bottled Water

    Cost To Replace A Dishwasher Pump

    Replacing a dishwasher pump averages $150 to $400. The pump plays a key role in draining the unit. When you notice your dishwasher is full of water after the cleaning program finished, a pump problem might be to blame. Bad pumps lead to stagnant water in your dishwasher, causing bacteria growth. This problem should be addressed immediately.

    Read Also: Dishwasher Drain Into Garbage Disposal

    The Ge Dishwashers Control Panel Is Locked

    The GE dishwasher comes with an extra safety feature that locks the control panel. For instance, the child lock feature prevents the dishwasher from being used accidentally by kids around the house.

    The reason why your GE dishwasher control panel is not working might be because the child lock safety feature has been reactivated.

    The safety measure is activated by pressing the child lock button once. However, you can easily deactivate it by pressing the same button down for about three seconds.

    Whirlpool Tall Tub Built

    Bosch 607335 Dishwasher Inlet Water Valve Replacement

    Best Affordable Energy-Efficient Dishwasher

    For some, energy efficiency is of utmost importance. Check out the Whirlpool Tall Tub dishwasher. This Whirlpool Dishwasher It has an Energy STAR certificate, is CEE Tier 1 qualified and runs at only $31 per year, according to standard energy prices and usage.

    So if you want to cut the cost of running, this is the dishwasher to consider. Of course, it has great cleaning features, too. Firstly, its a spacious option. There are 14 place settings, an adjustable silverware basket and its a tall tub washer.

    As for the cycles, there are four main options: normal, heavy, one hour wash and Soak & Clean. So whether you want the dishwasher to take its time on a heavy wash, or go at ultra-speed with the one hour wash, the world is at your disposal.

    You can also choose from these options: heated dry, high temperature, sanitization cycle and sensor wash.


    • It doesnt dry the dishes well.
    • Not the quietest 55 decibels.

    Product Specs

    You May Like: How To Tell If Dishes Are Dishwasher Safe

    Dirty Water Supply Line And Inlet Valve

    Many refrigerators come with an ice maker and a dispenser. This is likely to happen if you have a Whirlpool fridge or a similar brand. The dispenser and ice maker is a fantastic feature, but they can cause leaks in the refrigerator.

    The ice maker and dispenser hardly leak, but the water pipe connecting them can leak. A dirty water supply valve or leaky inlet valve is usually the component if the leak starts from under the fridge.

    To fix this issue, you need to check the water supply from its source to other components. Therefore, hiring an expert is always better.

    Heres how to fix a leaky fridge caused

    • Turn off the fridge for safety reasons.
    • Find the water supply valve and check thoroughly. Youre checking for visible cracks and confirming its connection with the line.
    • If theres a crack in the pipe, replace it with a similar one. You may need to remove the existing line to buy the exact size.
    • If theres a problem with the connection, call an expert to avoid further damage.

    Dishwasher Control Panel Repair Cost

    Dishwasher control panel repairs average $150 to $350, depending on the problem. The control panel interacts with your dishwasher, programming things like time and temperature, so it can make the appliance inoperable if it has a fault or failure. Sometimes, control panels do not need to be replaced and can simply be reset or adjusted to work again. Resets are most often needed if power has been interrupted to the dishwasher or a child lock has been engaged before you noticed the panel failure.

    You May Like: Best Dishwashers For The Money 2021

    Are Baby Bottles Dishwasher Safe

    Yes! Baby bottles from most major bottle manufacturers are perfectly safe to put in the dishwasher. This is true for plastic and glass bottles.

    However, you want to put all the parts on the top rack to avoid any melting from being too close to the heating elements.

    The FDA has banned the use of BPA in the making of baby bottles so parents dont need to worry about harmful chemicals leaching into the milk or formula as they feed their babies.

    Are Baby Bottle Nipples Dishwasher Safe?

    Nipples are dishwasher-safe. The best way to clean the nipple of a bottle is by using a bottle basket.

    Bottle baskets have compartments for all the components and keep them upright while washing. This allows the nipples to be cleaned more thoroughly and become safer for use.

    Recommended Reading: Black Dishwasher With Stainless Steel Tub

    If The Door Wont Stay Closed

    Bosch Dishwasher – Water Inlet Valve repair
  • Check for pots, pot handles, or other objects that may be extending out of the rack area.
  • Clear away any foreign objects or food debris that has built up on the door gasket .
  • If your dishwasher is new, you may need to push more firmly than usual on the door until the new door gasket softens up.
  • Make sure the lower rack is not in backwards by confirming that any plastic spacers on the rack are facing the door.
  • Make sure the dishwasher is level side-to-side and front-to-back.
  • You May Like: How To Use Kitchenaid Dishwasher

    Dishwasher Heat Exchanger Outlet Valve

    Genuine spare part for select models of Bosch, Neff and Siemens dishwashers More information

    In Stock

  • Genuine spare part suitable for select models of Bosch, Neff and Siemens dishwashers More information

    Usually despatched within 2 weeks

    Stock Number ES1689203

    Genuine spare part suitable for select models of Bosch, Neff and Siemens dishwashers More information

    Usually despatched within 2 weeks

    Stock Number ES1689203

  • Genuine spare part for select models of Bosch, Neff and Siemens dishwashers More information

    Usually despatched within 2 weeks

    Water Inlet Valve Clogged

    Problem: One possibility for a GE dishwasher not filling with water is a clogged water inlet valve. The water inlet valve allows water to flow into the dishwasher during a wash cycle. If you wonder why theres no water going into my dishwasher, it may be because the inlet valve is clogged with debris.

    Solution: Given the complex location of the water inlet valve in your dishwasher, a professional service can best assess if the valve can be cleaned or if it should be replaced.

    Also Check: Best Way To Clean Your Dishwasher

    Frigidaire Evaporator Fan Blade

    Part Number 5308000010

    The evaporator fan blade is used in conjunction with the evaporator motor. If you have noticed that your refrigerator is warm or chirping or squalling noises coming from the freezer section this part may need to be replaced. Please remember to unplug or disconnect the electrical power source to the appliance before replacing this part.

    Finding Out Why Your Frigidaire Dishwasher Wont Drain

    Endurance Pro 425458 Dishwasher Water Inlet Valve Replacement for Bosch ...

    If water remains in your Frigidaire dishwasher after the cycle ends, check the kitchen sink drain to make sure its not clogged. If theres no clog, try pressing the Cancel button most Frigidaire dishwashers run the drain pump when the Cancel button is pressed.

    If these tips dont help, a broken drain pump, damaged check valve, clogged drain path or control failure could be preventing the dishwasher from draining water.

    Check the drain hose for clogs and clear the drain hose if its clogged. Our Dishwasher Not Draining Video shows how to check the drain hose.

    The drain hose on many Frigidaire dishwashers includes a check valve that prevents water from backing up into the dishwasher sump through the drain hose. If the check valve is damaged, water may initially drain out of the dishwasher while the drain pump runs but then flow back into the dishwasher after the drain pump stops. Examine the check valve and replace it if its damaged.

    If the drain path is clear and the drain pump runs but doesnt pump water out of the dishwasher, then youll need to replace the drain pump. Youll also need to replace the drain pump if it doesnt run when it gets current from the control.

    Read Also: Kitchen Aid Dishwasher For Sale

    You May Like: How Long Does Dishwasher Last

    Replacement 00607335 Dishwasher Water Inlet Valve For Bosch / Thermador

    Replacement 00607335 Dishwasher Water Inlet Valve for Bosch / Thermador
    Orders placed by 4pm ET ship today!*

    Replacement water inlet valve used for some Bosch, Kenmore, and Thermador dishwasher models.

    Directly Replaces: 00607335, 607335, WV7335, 1386463, AH3477055, AP4070550, EA3477055, EAP3477055, PD00000067, PS8726680, PS3477055.


    • Lets water into the dishwasher.
    • Includes Water Valve and Bracket Assembly.


    Dont Miss: Dishwasher Repair Charles Town Wv

    Can You Repair A Dishwasher Water Inlet Valve Diy

    If youre like most homeowners, you should never attempt a DIY repair on a water inlet valve. Its not as straightforward as you might think!

    • Youll need the right tools for the job.
    • Youll be working with electrical components, elevating the risk of something going wrong.
    • Depending on the brand of dishwasher you own, you may have to strip wires, attach terminals, and fashion a testing cord to check the valves electrical components.
    • Given these factors, the cheapest, easiest, and safest approach is to hire a professional appliance repair service like West Coast Chief.

    > > Contact Us for Sevice

    A Simple Check for the Inlet Valve

    Unless you have an ohmmeter in your tool chest, lets cut to the chase. Its time to call the appliance pros who know what theyre doing.

    But if you have the right equipment and a working knowledge of appliances, and youre forging ahead with the DIY repair come hell or high water, heres how to troubleshoot that pesky water inlet valve.

  • Disconnect the dishwasher from power and water supplies.
  • Using pliers, gently detach any wires from the inlet valve.
  • Attach an ohmmeter to the valves terminals. If the meter reads infinity, one of the solenoids has failed.
  • But if the reading checks out, inspect the valve for food debris or sediment. Clean any clogs without disassembling the valve.
  • If steps 3 and 4 reveal nothing wrong, youll need to conduct a more thorough inspection. Or you can call us for service. Well be waiting.
  • Read Also: Dishwasher Drain To Garbage Disposal

    If Your Dishwasher Wont Start

  • Open the door and close it firmly to ensure its closed properly.
  • Make sure that you are closing the door within 3 seconds of pressing start if it has a top-button control.
  • Confirm that its recieving power. If lights on the display dont turn on when you press them, reset the breaker and try again.
  • Check that the Control Lock or Delay Start options arent selected on the displayyour dishwasher wont start as expected in these modes.
  • Make sure the water supply valve to your dishwasher is turned on all the way.
  • Clear any debris that may be caught under the float assembly located on the bottom of the dishwasher tub and be sure that it can move up and down freely.

    Most Popular