Wednesday, February 21, 2024
HomeNewsBosch Dishwasher E 15 Code

Bosch Dishwasher E 15 Code

How Do You Reset The Control Panel On A Bosch Dishwasher

Bosch Dishwasher E15 error code permanent fix

After you perform your troubleshooting and repairs, there is a chance that your control panel will still display the error code. To reset it, you must hold the start button down for three seconds. The display will go blank and then turn back on.

Alternatively, you can disconnect it from the power source for a minute or so and then reconnect. If you are still getting an error code after resetting, you could have an issue with your sensors. In that case, contact Bosch for support or repairs.

How Do I Fix Bosch Error E15

The Bosch E15 error code is likely indicating too much water in the dishwasher however, the error code could also be due to a control board glitch. If the error code was caused by a glitch, performing a hard reset by disconnecting the power to the dishwasher for five minutes should clear the error code.

Consider The Tilt Method

Another way to quickly clear the error code and potentially solve the problem is to tilt the dishwasher backward at a 45-degree angle. However, tilting the dishwasher is unlikely to be a long-term fix, and it may cause further damage to the dishwasher. It is also unlikely that you will locate and fix the cause of the error code, which could be a potentially dangerous leak.

If you decide to pursue this method to resolve the E15 error code, the dishwasher will need to be pulled out from under the kitchen cabinet and then carefully tilted back at a 45-degree angle.

When you tilt the dishwasher, the water in the base should come out and clear the error code. Make sure to disconnect the power and water from the dishwasher before moving it, and put something down to catch the water that comes out. Once the power is restored, the error code should have cleared.

You May Like: Parts List For Whirlpool Dishwasher

What Does The Red Light On A Bosch Dishwasher Mean

If you see a solid red light on your control panel, that simply means that the dishwasher is running. Some dishwasher models are so quiet that an indicator light is needed to tell you that it is on.

When the washing is complete, a green light should appear.

If your dishwasher is not starting, you may see a blinking red light. A blinking light means that the door is not closed completely. It should start up with no problem after the door is locked in place.

Inspection Of Dishwasher Tank

Bosch E22 Error Message : Bosch dishwasher error code e15, e24, e25 ...

If your water filter and leak sensor are perfect, you should check your dishwasher tank. The leakage in the dishwasher tank could be a possible cause of error code E15 appearance. To ensure no cracks in the water tank, you must perform a thorough inspection.

You have to repair your dishwasher tank in case of any cracks or damages. You can get the help of a good technician to repair your dishwasher tank leakage. After fixing it, if you still witness the error code E15, you should check other possible causes of water leakage.

Don’t Miss: Dishwasher Hose To Garbage Disposal

Water Tank Or Hose Is Leaking

Like all dishwashers, Bosch dishwashers have water tanks and several hoses inside. There are hoses for circulating clean or filtered water around the interior to wash the dishes, and there are drain hoses to remove dirty water from the machine.

At the center of the dishwasher, youll find its water tank. This is where water for washing dishes is stored to be used during cycles. Its generally located below a panel on the side of the dishwasher, and it should be large enough to hold enough water to complete each cycle.

In time, water tanks and hoses can become loose or damaged to the point that they leak. This could result from improper installation or unsealed joints, but it could also be that the fittings became loose to allow for easier disassembly of an old machine.

In any case, water will flow down to the lowest point of the machine the trough at the bottom which will trigger a safety switch, stopping the water flow.

To fix leaking Bosch dishwasher hoses and remove Bosch Dishwasher E15 Error Code, you need to replace them. Check for loose or damaged fittings and make sure all connections are tight by using a wrench.

Bosch dishwashers use a hose clamping system that connects to the Bosch dishwasher and screws tightly. Make sure this is sealed properly as well by tightening it with a wrench.

Error Code E0: Water Switch Triac Fault Or Float Issue

The most likely cause of the E05 error code is a water switch Triac fault on the main control board. In some cases, the error code indicates a damaged float or defective float switch. Before contacting a Bosch technician, you could replace the float and/or float switch to see if it resolves the error code.

You May Like: Are Souper Cubes Dishwasher Safe

How To Solve The Problem

All Bosh dishwashers, including Bosch Silence Plus models, are equipped with AquaStop protection. First of all, you need to eliminate the failure in the system. This happens if the control module sends the wrong command and error E15 is displayed on the display.

You need to reset the settings. Follow these steps consistently:

  • unplug the machine from the power supply
  • wait 10-15 minutes

If you could not reset the error and it appeared again on the display, then you need to move on to other repair options.

It is necessary to exclude the possibility of a float sensor sticking and remove all the water from the sump. Shake the appliance a little, so that the float returns to its previous position. Then unplug the machine and tilt it at an angle of 45 degrees. Drain the excess water into container. You can dry the washer by leaving the door open for the night.

Why Is My Dishwasher Showing The E15 Error Code

Bosch E15 error code diagnosis and repair

The Bosch dishwasher is one of the most complex and powerful dishwashers on the market.

The dishwasher is equipped with many advanced features that make it very easy to clean our dishes without leaving dirt.

Similarly, the newer model of Bosch dishwasher comes with error code features.

There are more than 20 error codes in the Bosch dishwasher, including the E15 error code.

E15 error code is such type of code that indicates a leakage issue in the Bosch dishwasher.

When the dishwasher sensor detects water in the base of your dishwasher, it will throw an E15 error code.

Almost every dishwasher model is equipped with an anti-flooding sensor that prevents over flooding of excess water in the dishwasher.

If this sensor is faulty dishwasher can also encounter an E15 error code. We need to consider every possible case and factor that can create leakage in the dishwasher to fix this issue.

In the next section, we will discuss the different problems and their solution, which could help you fix the E15 error code in your Bosch dishwasher.

Recommended Reading: Whirlpool Dishwasher Quiet Partner 1 Parts

How Do You Reset Bosch Error Code

The Bosch E15 error code is likely indicating too much water in the dishwasher however, the error code could also be due to a control board glitch. If the error code was caused by a glitch, performing a hard reset by disconnecting the power to the dishwasher for five minutes should clear the error code.

Bosch Dishwasher Error Code E15

When excess water is left in the bottom of the appliance your Bosch dishwasher e15 error code will display. Understanding how the dishwasher is supposed to drain will help identify what may be going wrong.

The drain pump in the dishwasher pushes the water out through a hose which normally extends from the dishwasher to the waste pipe or to the air gap which then has another hose connecting to the waste pipe.

When the dishwasher wont drain and the error code e15 Bosch dishwasher display is lit then you can presume there may be an obstruction or some form of damage along the way.

Bosch dishwashers are equipped with a detection system that displays an error code indicating where the fault is detected. The code is normally an e or f followed by two numbers. Some common Bosch dishwasher faults are listed below

You May Like: Vinegar For Dishwasher Rinse Aid

Dishwasher Troubleshooting: Dishwasher Error Codes

Getting a dishwasher error code that is not listed below?

If you cant find your error code on the list, please contact Bosch Customer Support at 1-800-944-2904. Before contacting, please have your model number ready, which will help our team resolve your issue faster.

Bosch Dishwasher Error Code Definitions

Error E12: Limescale build up. Find more about it here.

Error E14: Flow meter failure. Find more about it here.

Error E15: Water in the base trough. Find more about it here.

Error E16 & E17: Water filling the system. Find more about it here.

Error E18: Water flow into the dishwasher. Find more about it here.

Error E22: Filter is blocked. Find more about it here.

Error E23: Issue with drain pump. Find more about it here.

Error E24: Dishwasher not draining. Find more about it here.

Error E25: Drain pump blocked, drain issue, filter clogged or pump impeller is jammed. Find more about it here.

For additional error codes, .

From cleaning and care advice to dishwasher loading tips, weve got you covered with our how-to videos.

How Do I Put My Bosch Dishwasher In Diagnostic Mode

Bosch Spülmaschine Super Silence E15

There will be instances when you need to use diagnostic mode. You use this mode if you experience problems and no error code appears.

To initiate it, press and hold the “power scrub plus” and “regular wash” buttons simultaneously. Depending on your model, you may use the “wash” and “eco” buttons instead.

Lastly, press the power button, and it will run a test cycle to determine the error. Once the test cycle is complete, it will show the proper error code. If there was no error detected, it will display “0”.

If no error is found and you continue to have problems, contact Bosch customer service for further advice.

Read Also: Dishwasher That Hooks Up To Sink

Try To Clear The Error Code

The Bosch E15 error code is likely indicating too much water in the dishwasher however, the error code could also be due to a control board glitch. If the error code was caused by a glitch, performing a hard reset by disconnecting the power to the dishwasher for five minutes should clear the error code. If the error code returns, the water in the base of the dishwasher will need to be removed.

Broken Bosch Dishwasher Fixture

Bosch dishwashers have several fixtures that help water flow freely and smoothly throughout the machine, allowing it to run optimally. This includes a pump to direct the water, hoses to transport it from place to place, and fixtures to guide its flow along the way.

Additionally, Bosch dishwashers are engineered with advanced technology that helps them maintain top-notch performance over the years.

A dishwasher that is more than 10 years old , or one in which the surface of the dishwasher fixtures has been corroded over time, can give off an E15 code. This is a sign that water is leaking inside the dishwasher by passing through tiny cracks, or perhaps because something fell inside and cracked it. This could cause your dishwasher to trigger a safety switch and shut down immediately.

Replacing a fixture in a dishwasher requires some hardware knowledge, but its not too difficult for an experienced handyman. First, youll need to take off the panel covering the inside of the dishwasher.

Then you can unscrew any necessary screws and remove the part, replace it with a new one, and put everything back together. Hopefully, It will solve the Bosch Dishwasher E15 Error Code.

If you need help or have any questions, contact your local handyman service to help you out.

Read Also: Bosch Silenceplus 44 Dba Dishwasher

How Do I Fix Error Code E15 On Bosch Dishwasher

The Bosch E15 error code is likely indicating too much water in the dishwasher however, the error code could also be due to a control board glitch. If the error code was caused by a glitch, performing a hard reset by disconnecting the power to the dishwasher for five minutes should clear the error code.

How To Get Rid Of The E15 Error Of Bosch Dishwasher

Dishwasher E 15 code Bosch Neff Siemens – EASY Fix!

If you got the message about the error, so most likely your Bosch dishwasher stopped in the middle of a cycle because of power failure or the aqua-stop system work.

The dishwashers do not like it, that is, they do not like to be interrupted in the process of important work.

Important:

Before carrying out any work, make sure that the dishwasher is disconnected from the mains and is not under tension.

To get rid of the E15 error code of your Bosch dishwasher, you have to turn off the machine and unplug the power cord. Wait for a couple of minutes for the system to reset. Then turn on the device and run the program again.

In the cases when the E15 fault is caused by the water leakage sensor malfunction, it can be fixed independently. The sensor float could simply stuck. You have to carefully shake the washer from side to side. Then drain the water and leave to dry.

To prevent the water penetration into the lower part of the body, you should pay attention to the exact dosing of a detergent, and also be sure that the dishes with the remains of soap are not in a sink. The fault can be also caused by the excessive amount of foam that penetrates into the absorbent layer of the aqua-stop system in the pan.

The clogged water drainage system of Bosch dishwashers requires more efforts for the problem elimination. Remove the dishwasher from the kitchen to open the left side cover completely. Use old towels or rags to absorb the water from the bottom of the device.

Don’t Miss: Kitchenaid Top Control Dishwasher With Freeflex Third Level Rack

How Do I Reset My E15

The Bosch E15 error code is likely indicating too much water in the dishwasher however, the error code could also be due to a control board glitch. If the error code was caused by a glitch, performing a hard reset by disconnecting the power to the dishwasher for five minutes should clear the error code.

How Do You Clear A Bosch Error Code

How do you reset the control panel on a Bosch dishwasher? After you perform your troubleshooting and repairs, there is a chance that your control panel will still display the error code. To reset it, you must hold the start button down for three seconds. The display will go blank and then turn back on.

Also Check: Best Dishwasher Detergent For Older Dishwashers

What Causes The Bosch Dishwasher E15 Error Code

Resetting the error code as mentioned above will allow the dishwasher to function again. However, the problem will come back again if you do not address the root cause.

Unwanted water in your dishwasher trough could be caused by the usage of excess soap, a sump basin leak, a leak in the water tank or hoses, as well as broken fixtures within the dishwasher.

Related: 5 Common BOSCH Dishwasher Problems

How Do I Fix Error Code E15 On Bosch

Bosch Geschirrspüler Fehler Wasserhahn Leuchtet

The Bosch E15 error code is likely indicating too much water in the dishwasher however, the error code could also be due to a control board glitch. If the error code was caused by a glitch, performing a hard reset by disconnecting the power to the dishwasher for five minutes should clear the error code.

Read Also: Maytag 577-1 Dishwasher Manual

How Do I Get Rid Of The Error Code On My Bosch Dishwasher

How do you reset the control panel on a Bosch dishwasher? After you perform your troubleshooting and repairs, there is a chance that your control panel will still display the error code. To reset it, you must hold the start button down for three seconds. The display will go blank and then turn back on.

The Reasons Of The E15 Error Code Appearance

The E15 fault of Bosch dishwashers can be caused by the following factors:

  • sudden disconnection from the network
  • malfunction of the water drainage sensor when the aqua-stop worked
  • the system is clogged
  • hoses are wiped or installed in a wrong way.

Of course, the reasons can hide much deeper, but you should start with simple ones, otherwise, you can not do without an experienced master.

You May Like: Bosch Dishwasher Model Number Decoder

Loose Or Broken Drain Hose

Bosch dishwasher is equipped with lots of hosen that pass water inside the dishwasher.

If your dishwasherâs drain hose is cracked or loose, there is a high chance of water leakage at the bottom of your dishwasher.

When the safety switch sensed water, it triggered the E15 error code in the dishwasher.

The drain hose is located at the bottom of the dishwasher. One drain hose is connected to the dishwasher drain pump, and another is connected to the garbage disposal. You can quickly inspect the crack by removing the dishwasher from the kitchen cabinet.

What Customers Are Saying:

Bosch Dishwasher Reset / E-15 Error Code

Thank you for the expeditious answer. It’s good to know you’re out there and awake in the wee hours when I finally have time to ask questions about my Jenn Air.

JeanRiverhead, NY

You did one super job of explaining to me everything there is to know about this fridge. I’m looking forward to asking you questions in the future.

JimmyBagley, IA

Wonderful service, prompt, efficient, and accurate. Couldn’t have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn’t be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Read Also: Dishwasher Vs Hand Washing Water Use

RELATED ARTICLES

Most Popular